zotero/storage/M62UTWZ8/.zotero-ft-cache

364 lines
52 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

March/April 2010 GALILEAN ELECTRODYNAMICS 23
An Electrostatic Solution for the Gravity Force and the Value of G
Morton F. Spears (deceased) communicated by his daughter, Leigh Spears Tesfatsion Department of Economics, Iowa State University, Ames, Iowa 50011-1070 e-mail tesfatsi@iastate.edu
This paper claims that gravity is electrostatic, and substantiates this claim by deriving, through basic electrostatic relationships, a simple equation for gravity forces that includes an expression for the gravity constant G in terms of electrostatic parameters. Applied to interaction between two separated sub-atomic particles in open space, the derivation of G results in a value that falls within the range of the currently best known and accepted empirical measurements. The general electrostatic gravity equation next derived is applicable for all physical entities, however small, or large, thus presenting a comprehensive new way of perceiving and understanding gravity forces. A variety of other important conclusions also follow. For example, the electrostatic approach helps to explain why, regardless of the precision of their measurements, experimenters who use different physical layouts may continue to find different empirical values for G .
1. Introduction
This paper begins with the introduction of electrostatic equations for finding a capacitance force between two electrons. The equations are derived from the model in Fig. 1, which depicts two electrons positioned in separate Hydrogen atoms one meter apart. The Hydrogen atoms are assumed to have no relative motion, and are situated in 0 permittivity open-space.
Figure 1. Model to derive electrostatic force between two electrons in separated Hydrogen atoms.
The parameters Q , V , r * , r , K and P for the equations below pertain to electrostatic values derived from the model. The expanded force equation shown contains all the parameters required to evaluate the force solution, and the standard values for these parameters (in the MKS system of units) are presented either in Table 1 or in subsequent developments.
Table 1. A Glossary of Constants
Parameter Name Symbol Value and units
Elementary Electron Charge Qe 1.60219  1019 coulombs
Balanced Proton Charge Qp 1.60219  1019 coulombs
Mass of Electron M e 9.10953  1031 kilograms
Proton/Electron Mass Ratio P 1836.15
Permittivity of Vacuum Space 0 8.85419  1012 farads/meter
Speed of Light in Vacuum c 2.99792  108 meters/second
Effective Radius of Electron* R e 2.81795  1015 meters
* Re = Qe
2 / 40M ec2
By equating the resultant electrostatic force Fge to Newton's
empirical gravity force FgN = GM eM e / r 2 between two elec
trons at the same separation, a new value of G (signified by Ge
in MKS electrostatic units) is defined. The resultant force Fge
and term Ge are calculated as follows:
Fge = 1
2 QV / r* = (1 / 2)KQV / r .
After substituting derived expressions for K , Q and V , respectively,
Fge = 1
2 [40 Re
2farad-meters/1farad-meter][Qe ][Qp /(P + 1)40r] / r
24 Spears: Electrostatic G Vol. 21, No. 2
Then substituting known values from Table 1, finally
Fge = 5.54779  1071 coulomb-volts/meter, or
Fge = 5.54779  1071 newtons. Using Newton's expression for
the gravity force, let Fge = GeM e
2 / r 2 so that Ge may be defined
as Ge = Fger 2 / M e
2 . Then, after substituting known values,
Ge = 6.68541  1011 (coulomb-volt-meters)/(kilograms) 2 .
The minus sign determines that the force obtained is attractive, which occurs in Coulomb expressions and in the expanded electrostatic equation above, since the product of Qe  Qp is a
negative quantity. This convention of negative attractive forces is used throughout this paper. From [4], the widely accepted value of G in terms of masstimes-acceleration forces in MKS units (and with the minus sign convention) is:
G = 6.67259(85)  1011 (meters) 3 /(kilogram)(seconds) 2 .
Note that the two numerical magnitudes for G and Ge agree
within 0.2%. Because of this close agreement, Fge is, with al
most certain probability, the actual gravity force between the two electrons. To convert the expression for the special-case Fge gravity
force between two electrons to a general-case expression for the Fg gravity force between any two bodies, a multiplier term A is
provided. A is the ratio of the capacitance between bodies 1 and 2 to the capacitance between two electrons, with the same spacing r and same permittivity 12 between the pairs. That is,
A = (412 R1R2 / r) / (412 Re
2 / r) = R1R2 / Re
2.
Thus, Fg = Fge A = 1
2 KQV / r
 
 R1R2 / R e
2
 
 , where the R1 and
R 2 terms represent the effective radii of bodies 1 and 2, and R e
is the effective radius of the electron. In this electrostatic approach to gravity, explained later herein and in [1], with a very detailed mathematical analysis shown on pages 38-40 of [2]:
R1 / R e = C1 / Ce = M1 / M e , R2 / Re = C2 / Ce = M 2 / M e
Thus, A = M1M 2 / M e
2 . Since Fg = 1
2 KQVA / r , substituting
derived values for K , Q , V and A results in
Fg = 1
2 [8.83538  1040][Qe ][Qp / (P + 1)40r] M1M 2 / M e
2
 
 / r
and, using the known values for the parameters, Fg =
6.68541  1011 M1M 2 / r 2 coulomb-volts/meter (newtons).
The three progressive expressions just shown for Fg are de
rived from a force between two electrons and show clearly,
without any reference to Newton's gravity force expression, that
G = Ge = 6.68541  1011 (coulomb-volt-meters)/(kilograms) 2 .
Next, the values of G from empirical measurements presented in [4], and from the electrostatic calculations in this paper, are shown in ascending order of magnitude without the minus sign convention:
Determinations of the Gravitational Constant G
Fitzgerald et al. 6.6656(6)  1011 m 3 / kg s2
Meyer et al. 6.6685  1011 m 3 / kg s2
Currently accepted value 6.67259(85)  1011 m 3 / kg s2
Spears (electrostatic units) 6.68541  1011 CVm / kg2
Michaelis et al. 6.71540  1011 m 3 / kg s2
==============================
NOTE ADDED BY LEIGH TESFATSION (June 2, 2010; revised March 17, 2019): The electrostatic units CVm/kg2 for G derived by M. F. Spears are equivalent to the units m3/kgs2 for the gravitational constant G as usually derived; see above table. To establish this, consider the following sequence of definitions and identities expressed in standard international (SI) units as described in the official SI brochure: http://www.bipm.org/utils/common/pdf/si_brochure_8_en.pdf
SI Unit Symbols: ampere A, coulomb C, kilogram kg, metre m, second s, volt V, watt W
(1) W in SI base units: kg∙m2∙s(-3)
(2) C = sA
(3) V = W/A
From (1)-(3) it follows that
(4) V = W/A = m2 kg/s3 A = m2 kg/s2 C
From (4) it follows that
(5) CVm = m3 kg/s2
Hence
(6) CVm/kg2 = m3/kgs2
======================================
March/April 2010 GALILEAN ELECTRODYNAMICS 25
2. Basic Approach
The electrical energy stored between the two poles of a capac
itor of capacitance C is Q2 / 2C , or QV / 2 . Q represents the charge stored in the capacitor and V is the difference in potential between the two poles. The force between the two poles spaced at a distance r , is the energy divided by the distance, resulting in the expression F = QV / 2r . The V / r ratio is considered a voltage-per-distance gradient E -field, sometimes called an electrostatic force field. However, V / r fields can be produced by means other than the usual linear voltage drop through open space. For example, when a resistor consists of two poles separated in a medium, such as in the ocean, there is a V / r voltage drop produced from the volts/ohm (electric current) in the resistor. Similarly, when a capacitor consists of two separated poles in a medium, such as in vacuum open-space, there is a V / r voltage drop produced from the volts/daraf (electric charge) in the capacitor. The V / r gradient derived from the volts/daraf gradient in an electron-to-electron capacitor situated in space is used in this paper to find the electrostatic force between the two electrons. Since this can only be accomplished if the normal space-gradient V / r fields are cancelled or attenuated well below the magnitude of the capacitor generated V / r fields, the two electrons for the model calculation are assumed to be positioned in Hydrogen atoms. Although the "daraf" ( 1 / C unit of elastance S for a capacitor with "farad" unit of capacitance C ) is not used very often, it is used in this paper for V / S voltage gradients and for QV / 2S forces. The QV / 2S
force is converted to a QV / 2r force, and then to a KQV / 2r
force, so that Fge = KQV / 2r . The r  term denotes the length
in meters in space of one daraf for the capacitor under consideration. The mathematical derivation for an attractive force Fge
generated between the two poles of a capacitor in free space follows. Consider the physical system consisting of a capacitor, C, that has a pole-to-pole length r(C ) measured in meters, with a poleto-pole total elastance S (C) measured in darafs and with a poleto-pole potential difference V (C ) measured in volts. Let D(C ) denote the total number of meters associated with C , a pure number, so that r(C) = D(C) meters. Let M (C) denote the total number of volts associated with C , a pure number, so that V (C) = M (C) volts. And let N (C) denote the total number of darafs associated with C , a pure number, so that S (C) = N (C) darafs. For ease of notation, the dependence of these quantities on the physical system C will henceforth be suppressed. Let K denote the pole-to-pole total number of meters associated with C divided by the pole-to-pole total number of darafs associated with C ; that is, let K = D / N , so that K is a pure number. By electrostatic law, V = Q  S , where the Q is measured in volts per daraf. Let v denote the volts associated with one daraf, so that v = Q  [1 daraf], an expression measured in volts that is invariant to the units in which darafs are measured.
Let r * denote the length in meters of one daraf for the capacitor C , so that r * is defined by the relation r * K = r . Note that from these definitions and relations:
V / r* = VK / r = [Q  S ]D / N r
= [Q  N darafs]D / N r = [Q  1 daraf]D / r = vD / r ,
so that V / r * is measured in volts per meter and is invariant to the units in which darafs are measured. Consider the usual electrostatic force equation for the physical system C :
F = QV / 2r .
Converting to r * , one obtains
F = QV / 2r = QV / 2Kr * .
However, one can define another force, Fge , by:
Fge = QV / 2r* = (1 / 2)KQV / r = KF .
The force Fge , which has the magnitude of a gravity force and is
therefore assumed to be one, is derived as shown from electrostatic definitions and relationships. The K term denotes the D / N ratio (number of meters divided by the number of darafs) for the capacitance under consideration. In the Fig. 1 physical system, where C12 is used in the
model to derive the Fge force between two electrons, the num
ber of meters D is ( r meters)/(1 meter), a pure number, and the
number of darafs N is ( r / 40 Re
2 darafs) / (1 daraf), a pure
number, so that the ratio is:
K = r meters / 1 meter
r / 40 R e
2 = 40 R e
2 farad-meters
1 far ad-meter = 8.83538  1040
One more pure number term A , as shown in the Introduction, is used to expand the special-case expression for the Fge
gravity force between two electrons to a general-case expression for the gravity force Fg between any two bodies, so that:
Fg = KQVA / 2r ,
where
A = (412 R1R2 / r) / (412Re
2 / r) = R1R2 / Re
2 = M1M2 / Me
2.
K and A are pure numbers that remain invariant to the units applied to the expression for finding the gravity force in a given capacitance C physical system. To assist in understanding the electrostatic approach used in the next Section, a number of definitions and explanations are next provided. Effective radius: This is the radius assigned to an object as if it were a perfect conducting sphere that permits one to determine precisely the capacitance of that object to another object, or to the background space around it. For example, the capacitance
26 Spears: Electrostatic G Vol. 21, No. 2
C12 between two Objects 1 and 2, spaced at a great distance r12
between their centers, is 412R1R2 / r12 , where R1 and R 2 are
the effective radii of Objects 1 and 2, respectively, and 12 is the
permittivity of the intervening space between the two objects. The capacitance to the background C1 for Object 1 is 41R1 ,
and the capacitance to the background C2 for Object 2 is
42 R2 , where 1 and 2 are the permittivities of the media
surrounding Objects 1 and 2, respectively. The separation distance r12 must be much greater than the radii R1 and R 2 for
the above expressions to be accurate. Also, for electrostatic gravity, the linking capacitance V / S field is so minute that electrons are not moved out of position in objects on which the field impinges, which permits the full-strength field to react with all of the individual particles in that object. When this happens, even very dense metals, or any other materials, appear as relatively immense open spaces with tiny particles distributed throughout the volume. When an object consists of a cluster of very much smaller particles, and they are far-spaced from each other relative to their individual effective radii, the effective radius of the total conglomerate of particles (effective radius of the object) is the sum of all of the effective radii of the individual particles. However, when the smaller particles are forced closer together, the total effective radius is less than the sum of the individual particles' radii. For example, the total measured capacitance to the background (ground) for two 7.6-centimeter aluminum balls, spaced far away from each other, is simply 2C , where C is the capacitance 4R of each ball. When the balls are moved closer together, their total summed capacitance to the background decreases, finally reducing to about 1.4 C , or about seven-tenths of the separated total capacitance, when the balls actually touch. The effective radius for the two touching balls is then 1.4 R , or about 10.6 centimeters. This effect is exactly what happens with masses; that is, a mass is always equal to, or smaller than, the sum of its individual particle masses. It is smaller than the sum when the individual sub-atomic or atomic particles are packed close together. A mass M , for example, is the total sum mass M t of the individu
al particle masses times a mass-ratio M / Mt . For electrostatic
linkages between particles derived in this paper, a Hydrogen mass-ratio M / Mt = 1 is used, and is based upon Hydrogen
with a mass exactly equal to the sum of the proton and electron masses. There should be negligible error with this approach since, for example, in Hydrogen the particle nearest to the electron is at least 18,000 times its effective radius away. The conclusion from the above is that capacitances, effective radii, and masses using very minute V / S fields all follow the same principle, so that: For mass-ratios, C / Ct = R / Rt = M / Mt .
For the proton-to-electron ratio,
C p / Ce = R p / Re = M p / M e = P = 1836.15
For any object-to-electron ratio, C / Ce = R / Re = M / M e .
In this electrostatic approach, the above relations are used to find G and precise gravity forces between particles from the size of electrons up to the sizes of galaxies or greater. Chapters 5 and 6 of [2] provide a more detailed discussion of capacitances, effective radii, and masses as used for electrostatic determination of gravity forces. The most important radius used in this paper as a basis for determining the electostatic gravity force is the effective radius of the electron. This radius can be found from Einstein's energy
mass relation E = Mc2 , where c is the speed of light in space of permittivity 0 . The total energy of an electron is
Qe
2 / Ce = Qe
2 / 40 Re = M ec2 . Thus,
Re = Qe
2 / 40M ec2 = 2.81795  1015 meters.
QV / r Suppression: This is the cancellation plus attenuation of normal V / r fields that ensures sufficient reduction of the Coulomb charge forces to permit unaffected derivation of
QV / 2S (or QV / 2r* ) gravity magnitude forces. In Fig. l, the following five attributes of a Hydrogen-to-Hydrogen interaction are considered. 1) The charge magnitudes of the proton and the electron are identical with plus and minus values respectively; that is, Qp = Qe .
2) In Fig. 1, the distance between the individual sub-atomic particles of the reference Hydrogen atom to the individual particles in the second Hydrogen atom is one meter plus or minus twice the Hydrogen atom radius when there is a rotation of the two sub-atomic particles with respect to each other in both atoms. This means that a very minute rotating V / r field vector is present at each atom from the rotating dipole of the other atom. However, these fields impinge on charges of equal plus and minus values resulting in force cancellation; that is, two rotating force vectors of equal magnitude, but 180 out of phase, act upon the proton and electron respectively in each atom. 3) The integration over time of any residual rotating force vector not cancelled to zero, if any, produces a zero magnitude continuous force. The moment of inertia of an object on which the field impinges, for example, will filter out any residual rotating V / r force and leave only the continuous force, which is zero. 4) Furthermore, in actual situations, there are not just two Hydrogen atoms involved at a given separation, but a vast number of dipole atoms, all producing very diminutive rotating force vectors in random phase relationship that, when summed, statistically cancel toward zero. 5) The proof that the QV / r effects are sufficiently suppressed in actuality is that no coulomb forces can be measured between bodies composed of equal numbers of plus and minus charges; but note that gravity forces can still be measured. V / S field strength: This is the normal magnitude of a field so minute that all objects and materials appear to be open spaces sparsely peppered with tiny particles. The word field is in quotes because the V / S voltage gradient, which has the unit of charge, is not usually thought about at all, much less as a field. However, the unit of one daraf for S has a real length for capac
March/April 2010 GALILEAN ELECTRODYNAMICS 27
itors that consist of two separated particles in space. Because of this, the gradient has the ability to produce a force when impinging on a charged particle. This force is proportional to QV / S . The force is so small that it cannot move electrons, or other charged particles, which are fixed in place within a body by relatively huge Coulomb forces. Without any charged particles' responsive movements, there is neither electrical conductivity nor polarization to cancel the field, which then impinges on every particle within a body no matter how deeply imbedded Actually, the V / S field travels with less attenuation through a particle-filled body than through open space. Refs. [1] and [2] both explain this phenomenon by showing that the capacitance of an air-spaced capacitor is increased when fine metallic particles are distributed in the space between the poles. Just as important, there is no Faraday shield possible for the minuscule "fields". Even a sheet of silver, for example, readily allows the field to pass through because, without electrical conductivity, it is not possible to short-circuit the field by attaching separated particles of the silver to ground.
3. Solution Derivation
Before presenting the model and electrical circuits in space that result in equations for the correct magnitude of gravity forces and G in any systems of units, a preliminary discussion of the technique is in order.
When there is a V / S field between entities, the S represents a number of darafs (the inverse units of capacitance) spaced linearly with distance between the entities. For the capacitance between two electrons in free space separated by one
meter, for example, there are 1.13181 1039 darafs calculated to run in a straight line between electron 1 and electron 2, and there is also one meter of distance running in a straight line between 1
and 2. Each daraf then corresponds to 8.83538 1040 meters in field distance terms. This permits one to convert the volts/daraf field to a very small conventional volts/meter field and to obtain forces directly in terms of newtons, rather than in some unit of force which must then be converted to newtons by additional manipulations, as was done in [1]. For small particle entities with more capacitance between them, say an electron and a proton, the number of darafs is less than between two electrons at the same distance. This fact results in a greater volts/daraf value, a greater volts/meter field and a greater KQV / 2r force, all of which should become clear in the approach to follow. A permittivity change in the S path medium between any two entities could also slightly affect the gravity force between them. However, the analysis in this paper uses a fixed  = o free space as
the medium between separated particles for the determination of their gravity forces and G . In this approach two separated electron entities 1 and 2 are used as a basic reference for gravity with each of the electrons as part of a Hydrogen atom. The protons in the Hydrogen atoms ensure that all of the normal V / r electric fields between the two Hydrogen atoms are cancelled in the path between the atoms, and effectively in the nearly same path between the electrons. The second electron 2 is then considered only for its effective radius, neglecting any effect of its charge, which has been can
celled out at Position 1. All calculations are performed to find the forces with respect to Position 1. The gravity forces and Ge about to be defined and quanti
fied are derived with the particles motionless with respect to each other, all in one three dimensional spatial reference system. The constants, symbols and units used are all standardized in the MKS system of units, with magnitude values given to six places. Specific electrostatic expressions and component values are from the college-level physics instruction book by Robert Resnick and David Halliday [3]. See Table 1 for the most important parameter values used in this paper. Figure 1 presents the model diagram used as a basis to compute Fge and Fg gravity forces in all electrostatic terms, and
from these, the value of G used as the empirical multiplier constant in the Newton mass-driven expression for a gravity force. Specifically, Fig. 1 depicts a Hydrogen atom with an electron
at Position 1 having a negative charge Qe
, an effective radius
R e , and a capacitance C1 to the background. In the same Hy
drogen atom, there is a proton at Position 3 with a positive
charge Qp
+ , an effective radius of PR e , and a capacitance C3 to
the background. P is the proton-to-electron radii ratio. The center-line distance from this Hydrogen atom to the electron at Position 2 in a second Hydrogen atom is arbitrarily chosen as 1 meter, with the two atoms situated in permittivity 0 free space.
C12 is the capacitance from the electron at Position 1 to the elec
tron at Position 2. C32 is the capacitance from the proton at Po
sition 3 to the electron at Position 2. C123 represents the capaci
tance from the electron at Position 1 to the proton at Position 3 via the electron at Position 2, and is the capacitance obtained with C12 and C32 in series. V1x is the induced voltage relative
to the background at the electron in Position 1, which is initiated by the charge of the proton in Position 3, and transferred as a positive voltage to Position 1 via C123 . V3x is the induced volt
age relative to the background at the proton in Position 3, which is initiated by the charge of the electron at Position 1, and transferred as a negative voltage to Position 3 via C123 . The magni
tude of V1x is derived using the circuit in Fig. 3, and is used in
the expression for the force between the electron poles of C12 .
The magnitude of the voltage relative to the background, V3x ,
when derived in the same manner as V1x , is equal in magnitude
but reversed in polarity; that is, V3x = V1x . V3x could be used
in an expression (not shown in this paper) to find the force between the proton and electron poles of C32 , but would only be
redundant in view of the more general method used here for expanding the electron-to- electron force to forces between other particles or larger bodies. The expressions for the values of the components in Fig. 1 are as follows:
Re = Qe
2 / 40M ec2 = 2.81795  1015 meters;
28 Spears: Electrostatic G Vol. 21, No. 2
P = Rp / Re = M p / M e = 1836.15 ;
0 = 8.85419  1012 farads/meter;
C1 = 40Re farads;
C3 = 40PRe farads;
C12 = 40 Re
2 / r farads;
C32 = 40PRe
2 / r farads;
C123 = C12C32 / (C12 + C32 ) = [P / (P + 1)]40Re
2 / r farads;
Qp
+ = (Qe
) = 1.60219  1019 coulombs;
V1x = (Qp
+ / C3 )  (C123 / C1 ) = Qp
+ / (P + 1)40r volts;
V3x = (Qe
/ C1 )  (C123 / C3 ) = Qe
/ (P + 1)40r volts.
For ease of notation, the plus and minus signs shown as exponents for the proton and electron charge polarities will henceforth be deleted. Since the term S applied to elastance of capacitors in units of darafs is not generally required in electrostatics, the following expressions for the elastance of C12 and C32 are included below
for clarification:
S12 = r / 40 Re
2 = 1.13181  1039 darafs
S 32 = r / 40PRe
2 = 6.16406  1035 darafs.
Figure 2, which represents the Fig. 1 model as an equivalent electrical circuit, is next provided to show all the component values, and to show from the vantage point of Position 1 or Position 3 that a particle at Position 2 is always at zero potential relative to the background because of its position in the capacitance divider network. Also, if one travels along the center-line path from the first Hydrogen atom (Position 4 in Fig. 1) to the electron at Position 2, there would always be zero potential relative to the background encountered due to equal distances from the positive proton charge at Position 3 and from the negative electron charge at Position 1. Without a potential, there can be no V / r field along the path. Reversing the situation, the electron at Position 2, from the vantage points of 1 or 3, appears as a particle at zero background potential due also to the cancellation of all V / r fields coming from the proton and electron combination in the far-spaced Hydrogen atom. Furthermore, even the induced V1x and V3x equal magnitude diminutive voltages shown in
Fig. 1 produce no V / r fields between Positions 1 and 2 since V1x is positive, V3x is negative, and their V / r sum is zero.
Figure 2. Electrostatic circuit diagram of model. Note
V1 = Qe / 40 Re , V2 = 0 , V3 = Qp / 40PR e . (Also note,
R3 should be Re.)
Next, the circuit in Fig. 3 is used to derive the induced voltage V1x at Position 1 by using Thevenin's Theorem. The voltage
at Position 1 coming from the proton at Position 3 is induced through C123 , but it appears at Position 1 to arrive via a capaci
tance C12 from a particle at Position 2. The charge (or voltage)
of the electron at Position 1 is not used in this kind of determination; but the electron's capacitance serves as the load across which V1x appears.
Figure 3 is next used to calculate the force between electron 1 and electron 2. The voltage V1x at electron 1 relative to the zero
voltage at electron 2 is encountered at the charge Qe . All nor
mal space-attenuated V / r fields have been cancelled to near zero between the two electrons, which negates any normal QV / 2r capacitance force between the poles. However, Qe can
use a different kind of V / r voltage-gradient field available between 1 and 2 to construct another force. There is an available voltage gradient V1x / S12 between 1 and 2. The voltage gradi
ent V1x / S12 through the capacitor C12 is the same as V1x / r * ,
which is convertible to KV1x / r . The resultant force Fge be
tween the two electrons is then Fge = (1 / 2)KQeV1x / r , and after
substitution for K and V1x ,
Fge = 1
2 [8.83538  1040](Qe )[Qp / (P + 1)40r] / r .
For the general gravity force between any two masses,
Fg = Fge A = FgeM1M 2 / M e
2.
This derivation of electostatic gravity forces could just as well have been based upon the force between the Position 3 proton and the electron in the far-spaced Hydrogen atom, with exactly the same value derived for G . However, if the forces are derived between either the Position 1 electron or the Position 3 proton to the distant proton, it must be considered that a proton consists of not just one particle, but a number of smaller particles
March/April 2010 GALILEAN ELECTRODYNAMICS 29
with each particle having its own associated force to other farspaced particles. If one concludes that the proton has the equivalent of about 1836 times the number of particles that make up the electron, it will appear for the electrostatic model as if about 1836 electrons without any charges are situated at the proton position in the far-spaced Hydrogen atom. With this approach all of the interactions result in appropriate gravity forces. This multiparticle assumption for the proton appears to be a correct assumption because it also reconciles an apparent anomaly when
using Einstein's E = Mc2 expression applied first to the electrical energy of the electron and then to that of the proton.
Figure 3. Schematic diagram from model to determine the force between electrons at positrons 1 and 2.
So far, an apparently straight foward electrostatic method for the determination of gravity forces and the value of G has been presented. However, there are two things that might introduce discrepancies when one empirically measures G . The first involves the assumption that the mass of a Hydrogen atom is equal to the sum of the proton and electron masses. The second involves solutions that are made only with a model immersed in 0 permittivity background.
The ratio of the Hydrogen effective mass M H to the mass of
the proton plus the electron is important in this paper because, if less than 1.0, it would result in slightly smaller values for the electrostatic gravity forces and for G . For example, if the massratio were 0.998, both the forces and G would have to be multiplied by this factor because the electrostic forces derived are all in terms of the electron and proton effective radii and masses.
To determine an actual mass-ratio for Hydrogen, a quantum method and an electrostatic method were both tried to find the value of M H / (M p + M e ) . In the quantum method, the Hydro
gen binding energy converted to mass, M b , was subtracted from
the proton-plus-electron mass, so that
Mass-Ratio = (M p + M e M b ) / (M p + M e ) ,
where from [3], the Hydrogen binding energy converted to mass is
M b = M eQe
4 / 80
2h2c2 ,
and h is Planck's constant, 6.626176  1034 joule-seconds.
This method found that the binding mass was less than 107 times the proton-plus-electron mass. Therefore, from the quantum analysis, the Hydrogen mass-ratio stays as exactly 1.0 for the force and G values as determined to six places herein. The electrostatic method to determine the mass-ratio of Hydrogen involves the effect of C13 (not shown in the model),
which is the capacitance between the proton and the electron within the Hydrogren atom. C13 is effectively added in parallel
across C1 and C3 . Since the mass of a charged particle is pro
portional to its energy, Q2 / C , the new effective mass for the
proton is proportional to Qp
2 / (C3 + C13 ) rather than to Qp
2 /Cp
, and the new effective mass for the electron is proportional to
Qe
2 / (C1 + C13 ) rather than to Qe
2 / Ce . The expression for C13
is 40 R p Re / r13 and depends on what value one picks for the
distance r13 between the proton and the electron. A search through the literature found values ranging from a minimum of
0.528  1010 meters to a maximum of 1.28  1010 meters. The worst-case radius for the Hydrogen atom; that is, the value that affects the mass-ratio the most, is the minimum value derived on page 276 of [3]. This lessens the effective mass of the electron by about 9.8% and the effective mass of the proton by about 0.0053%, arriving at an overall mass-ratio for Hydrogen of about 0.99989. The Hydrogen mass-ratio values found by either the quantum or electrostatic means just shown are so nearly equal to 1.0 that any change would be trivial, hence the values in this paper remain as derived for the electrostatic gravity forces and for G . Next, the effects on the solutions for gravity forces and G are determined when the derivations are not for masses in an 0
permittivity background. This means that, while the expressions apply to gravity between electrons, protons, and Hydrogen atoms in free space, they may not universally achieve the same results as those from empirical measurements. For example, when the values of 1 at Position 1, 3 at Position 3, and 12 in
the path between Positions 1 and 2 are carried along in the derivation for the general electrostatic expression for the gravity force, the gravity force expression becomes
30 Spears: Electrostatic G Vol. 21, No. 2
Fg = [KQVA / 2r]  [12
2 / 13 ] .
What does this dependence upon permittivities mean? Presumably, within the Hydrogen atom where the voltage values relative to the background are formed, one might expect the permittivity to be always 0 , so that 1 = 3 = 0 . However, for
very miniscule fields as used in this paper, there is an entirely different scenario. All objects and materials appear as relatively large open spaces peppered with tiny particles. The epsilon values represent effective permittivities, which increase as more tiny particles are packed into a given volume of an object or material; that is, as the density increases. In [1], an apparent permittivity increase was demonstrated by adding tiny particles in the air space between the plates of an air-dielectric capacitor. This suggests that elements and materials may have internal effective epsilon values for very small fields that range from a minimum of 0 for Hydrogen, on up to, say, kU 0 for uranium 238, where
kU is the internal effective dielectric constant of uranium 238.
At the present state of the art for electrostatic relations within atoms, it is not possible to predict accurate theoretical values for internal miniscule-field dielectric constants of various elements and materials. Externally viewed, the mass of an object decreases relative to its total internal particle masses. This decrease is caused by some function of the packing density, which includes the effect on Fg ,
if any, of (0
2 / 13 )  1 . Whatever this effect does, as long as it
does not change the mass of Hydrogen, it is automatically removed in the expressions derived in this paper because the effective radii used are directly proportional to the externally viewed masses. However, any effect in the path between masses is not removed. Therefore, if we let G0 denote a base G derived in
0 space, then a measured G is
G = G012
2 / 0
2.
If an experimenter is attempting to determine G empirically by measuring the force between two masses, he or she should be aware of this effect and account for the nature of the path between the masses, if possible. The path could, for example, run almost entirely through the mass materials being used, if measured between two closely spaced bodies. On the other hand, there could be a relatively large 0 spacing. The Ge value de
termined herein, for example, is the right one to use without correction for a path between any two far-spaced planets, galaxies, or the like. For those objects weighed on earth, 12 is Earth's
effective permittivity because almost the entire path between the two masses of interest is through Earth. Unfortunately, at the present time there is no way of calculating the extent of Earth's path effect on the weight of an object. Earth's effective permittivity might be measured, however, by noting the reduction in weight of an object versus the distance it is moved away from the surface of Earth. Any such reduction in excess of the square-ofthe-distance fall-off from the center of Earth is then due to a squared function of Earth's internal effective permittivity. The
authors of [5] measured such an effect but did not relate it to an effective permittivity.
4. Electrostatic Gravity Background
An electrostatic force F takes the form of a charge Q multiplied by a voltage gradient E . E may alternatively be denoted as a voltage/distance term V / r , resulting in the expression for the force F = QV / r . In the MKS unit structure, F is the force in newtons, Q is the charge in coulombs, V is in volts (electrical potential relative to another electrical potential), and r is a distance in meters. The ratio V / r is spoken of as a field of a magnitude given in volts per meter. The force between two point charges 1 and 2 in free space, from this same conception,
evolves into the (Coulombs Law) expression F = Q1Q2 / 40r 2 ,
where 0 is the property of permittivity (farads/meter) in the
vacuum medium where the field links r-spaced Q charges 1 and 2. If the expression yields a negative force for F (one Q positive and the other negative), there is attraction between points 1 and 2. Conversely, when both Q charges are either positive or negative, the force F is positive and results in repulsion between points 1 and 2.
However, there are other types of voltage gradient fields besides the well established and much used volts per meter. For example, if an electrode is placed in the ocean and energized with a voltage source, V / r fields emanate from the electrode; but the real field magnitude is not determined by the distance r in the denominator but rather by the ohmic resistance causing a drop in the voltage with distance. The V /  (volts per ohm) ratio is called an electric current I in amperes and is usually not thought of as a field. Similarly, if an electrode is placed and energized by a DC (steady-state amplitude) voltage source in open vacuum space, a DC field V / r emanates from the electrode; but if the field links two entities, the magnitude of the field between them is really determined by the capacitance C between the two entities and the capacitances of the two entities to background space (instead of a simple V / r conception). The real field is a voltage drop through the capacitance in space and can be altered from a straight-line V / r field by directing it onto a new path (through a curved rod of greater permittivity than the surrounding space, for example). The voltage-drop field is V / S , where S is the inverse of capacitance, called elastance in units of darafs. The capacitance field can also be expressed as VC (volt-farads), which has the units of coulombs. Since there was no other available name for such a field, it was designated a Qf (coulomb) field in [1].
The question then arises whether there is a force F = QQf
(or F = QV / S ) as there is for F = QE (or F = QV / r ). Astonishingly, the answer is yes. When applying F = QV / S to electrical circuits in space involving the capacitances between Hydrogen atoms, the forces obtained are forces agreeing with the
Newton F = GM1M 2 / r 2 gravity forces within 0.2%, when the
G applied in the Newton expression is the generally accepted value. Furthermore, for a capacitance there is an equivalent mathematical relationship for the work required for a change in
March/April 2010 GALILEAN ELECTRODYNAMICS 31
energy U between the poles when moving from one pole to the other in linear distance specified either in meters or in darafs; that is,
U1 = 1
2 (QV / r)  r , U 2 = 1
2 (QV / S )  S .
The book [1] was written about this in 1991. A great deal of the writing in the book was expended (and not quite correctly, as it turns out) trying to account for the 0.2% difference. The biggest obstacle shown by the feedback responses, however, concerned an apparent inability to convert from one system of units to another in the gravity force equations. The explanation in the book, as viewed in present-day understanding, was on the right track and obtained correct results but lacked a complete description of the method used, which does convert in all systems of units. In 1993, the units-conversion difficulty precipitated a second
book [2] based upon capacitance forces of CV 2 / 2r , an acceptable arrangement of units for forces. However, an arbitrary selection of the effective radius of the electron for capacitance (as if it were a plastic-like material) was required to make the theory agree with Newton's force. This seemed a reasonable enough approach at the time, especially as there was no universal agreement among physicists for the make-up or value of the electron radius. Fortunately, Trevor Silvey, an engineer from England, kept searching to find out why the results in [1] were so accurate, even if there were seemingly wrong results when converting to units other than MKS. He took no stock in [2], and worked diligently, using relativity and other means, to bring the first book's concepts to fruition. After much correspondence back and forth with Trevor, two things happened that indicated a terrible waste of three years on the second concept and returned the direction back to the first book's concept. First, there appeared in [3] an article entitled "Gravity's force: Chasing an elusive constant" that showed four measured G val
ues, in MKS units ranging from a low of 6.6656(6) 1011 (Fitz
gerald et al.) to a high of 6.71540 1011 (Michaelis et al.), representing a spread range of about 0.75%. The theoretical G value
of 6.68541 1011 from [1] falls in between, only about 0.19%
above the accepted value of 6.67259(85) 1011 , which itself falls within the range. Therefore, there is now a realization that a 0.2% difference is well within the tolerances being considered for G , and the discrepancy should never have been a worry. Second, after back and forth exchanges of ideas with Trevor Silvey and with further review of the original equation, it became clear why the units do not seem to agree in the QV / 2S versus QV / 2r picture of forces, yet they actually do so. This unit conversion difficulty has been a big obstacle, preventing readers of [1] from accepting the electrostatic approach to gravity. However, it is really a simple matter to convert from one system of units to another, but all this time it somehow escaped resolution into an understandable and acceptable mathematical form. In the search for the solution, the volts/ohm field analogy served as a means to realize how to convert volts/ohm to volts/meter in seawater; then, following, how to convert volts/daraf to volts/meter in space.
For an uncomplicated analogy, consider the example of a linear, one-megohm resistor one meter long with an end-to-end potential difference of one volt. One can quickly observe that the
magnitude of the volts/ohm for this resistance is simply 106 volts/ohm; and the field volts/ohm is simply the electric cur
rent I , which remains the same 106 amperes no matter what system of units is applied for the resistance. One can also quick
ly see that the length of one ohm is 106 meters. The difficulty for so long has been the use of these kinds of relations without stating them in acceptable mathematical terms. Actually, the mathematical conversion of V /  to V / r in the given one
meg-ohm physical system is: V / r = 106 V /  (volts/ohm)
multiplied by 106 (the number of meters)/(the number of
ohms) times 106 ohms/meter. The V / S volts/daraf field is converted to a V / r volts/meter field in the same manner by multiplying the V / S volts/daraf field by (the number of meters)/(the number of darafs) times the darafs/meter in the physical system defined. The conversion ratio multiplier term is a pure number that stays the same in all systems of units for the physical system defined.
5. Concluding Remarks
Purely classical physics principles have been used to determine magnitudes of electrostatic forces between sub-atomic particles, atoms, and larger neutrally charged bodies. The magnitudes of these forces fall within the range of values determined by empirical measurements of gravitational forces, and are therefore assumed to be gravitational forces. From a model depicting two Hydrogen atoms separated in free space are derived electrostatic schematic circuits and expressions that permit solution for, not only the gravity forces, but also the value of the illusive gravitational constant G , in terms of electrostatic units in any chosen system of units, but specifically in terms of coulomb-volt-meters per kilogram squared in the MKS system of units. Along with the realization that gravity is almost certainly an electrostatic phenomenon comes a new uncertainty related to the nature of the medium in the path between attracting masses. For ultra-miniscule voltage gradients in the order of magnitude dealt with in this paper, any medium other than vacuum space appears as a large open space with very tiny particles dispersed throughout. If the particles have either some conductivity, or permittivity greater than 0 , and if the medium is between two
separated masses, the particles serve to increase the capacitance linkage between those masses. This effect of increased linking capacitance is the same as if a slightly greater permittivity existed in the path between the masses. The precise effective permittivity increase for various elements and materials is not yet stateof-the-art knowledge. However, from the expressions used to derive gravity forces in this paper, G is altered by this presently unknown effective permittivity 12 as shown in the expression:
G = G0  12
2 / 0
2,
32 Spears: Electrostatic G Vol. 21, No. 2
where G0 represents the G value in 0 permittivity space, and
12 is the effective permittivity in the path between two masses
of interest. If sub-atomic particles in medii have complete field short-circuiting capabilities, they cause the maximum 12 per
mittivity possible. Assuming this maximum effect for a path through Earth's medium, and using the technique developed in Appendix C of [1] to estimate the effective permittivity of Earth, the effect of increased G at Earth's surface has caused our weights of everything to measure slightly greater than if the path were entirely through a vacuum. Eckhardt, Jekeli, Lazarewicz, Romaides and Sands, from their tower gravity measurements reported in [5], enforce this hypothesis. They measured, as they moved away from Earth, a very slight extra drop in weights below the normal decrease due to the square-of-the-distance from the center of Earth. This happens in the electrostatic approach also because, while most of the path is still through Earth's medium, a small part of the path is through a lesser permittivity air medium. A careful detailed analysis of their results, or similar new measurements, might yield the true magnitude of Earth's effective 12 , at least for Earth's path to the measurement site.
The basic conclusions resulting from this paper will now be summarized: 1) Gravity is an electrostatic phenomenon. 2) The gravitational forces and G values determined in this paper are based on forces between particle masses separated by distances in vacuum space that are very great relative to the sizes (effective radii) of the particles themselves. 3) Any experimenter performing precise force measurements between masses does not determine an invariant empirical gravitational constant G , but determines instead a G for the particular physical layout. This is because the effective permittivity of the path between the masses could have a consequential effect. A path, for example, might run mostly through vacuum or air, or mostly through the masses under measurement, or for nearly equal distances through two different kinds of masses. All kinds of physical layouts are conceivable. The gravity that is encountered near the surface of Earth has its own G value related to a path medium running almost entirely through Earth. 4) It is possible to use classical physics, at least as used herein, to understand interactions between particles within and outside
of atoms even though the scale of interaction is less than 1010 m. 5) Electrostatic gravity suggests fertile new techniques for exploration in several domains. For example, a new tool seems to be available to attack some of the mysteries confronting both cosmologists in large-scale environments and quantum physicists in small-scale environments. Other research, more closely related to advancing an understanding of the technique evolved herein, could be important. The following are two suggested examples: 5a) Since there are forces based upon voltage gradients in capacitors, might there not be similar types of forces based upon voltage gradients in resistors? The environment and parameters involved appear to be easier to control than for measuring forces in capacitors. For example, it is not difficult to measure forces between electrically energized particles in a wide range of con
trolled conductivity liquid backgrounds, such as in distilled water or in oil. 5b) Only part of the overall force puzzle is addressed in this paper. Another part relates to the derivation for the inertial force, F = Ma . Just as the Newton expression for a gravity force between two entities has many of the attributes of the Coulomb expression for a charge force between two entities (mass or charge squared divided by a distance squared), the F = Ma expression contains an acceleration parameter that acts on a mass to create an opposing force, much like inductance acts on an electric current to create an opposing force (back emf voltage). Unless there is an increasing or decreasing current, the inductance has no effect; but when it does, it opposes the increase or decrease of that current. Through open space, the inductance in space (permeability) opposes increases and decreases in velocities of charges which, when moving, are actually electric currents. The above observations suggest that there could be a new electromagnetic expression for F = Ma .
References
[.1.] Morton F. Spears, CTG Capacitance Theory of Gravity. (ISBN: 09629933-0-1, Spears Associates, Inc., Norwood, MA, 1991); available at http://www.econ.iastate.edu/tesfatsi/MFSpears/.
[.2.] Morton F. Spears, CTG Capacitance Theory of Gravity Book II (ISBN: 0-9629933-1-X, Spears Associates, Inc., Norwood, MA, 1993); available at http://www.econ.iastate.edu/tesfatsi/MFSpears/. [.3.] Robert Resnick and David Halliday, Physics (ISBN: 0-471-34530-X, John Wiley and Sons, New York, Revised 1978).
[.4.] Ivars Petersen, “Gravity's force: Chasing an elusive constant”, Science News 147 (17) p. 263 (1995). [.5.] Donald H. Eckhardt, Christopher Jekeli, Andrew R. Lazarewicz, Anestis J. Romaides and Roger W. Sands; “Tower Gravity”, Physical Review Letters 60 (25) 2567-2570 (1988).
CORRESPONDENCE
Red Shift is Due to the Doppler Effect . . .(Isn't It?) continued from page 23
The geometric mean is the square root of the product, or
(1+v / c)/(1 v / c) , (4)
and the resulting adjustment factor is the square root of the ratio, or
1/ 1 v2 / c2 . (5)
Expression (4) is familiar as the algorithm for the Relativistic Doppler Effect, and was chosen presumably because the adjustment factor (5) is the same as the Mass Ratio factor in SRT. What a coincidence! The lower value (1 + v / c) is multiplied by the factor, the other divided. The idea that any valid reason exists for doing that is refuted. Light is not mass, so it does not merit a relativistic change. That such a change appears to produce the required result is empirical, and not a valid reason. Eq. (1) is the only valid equation, is valid whichever participant is moving