zotero-db/storage/UAXCI4IP/.zotero-ft-cache

283 lines
14 KiB
Plaintext
Raw Normal View History

EXPERIMENTS SHOWING DISTURBANCE OF THE PRINCIPLES OF RELATIVITY, EQUVALENCE AND ENERGY CONSERVATION (workshop)
OPTICAL MEASUREMENTS OF THE ABSOLUTE VELOCITY OF THE EARTH
Stefan Marinov Institute of Fundamental Physics Morellenfeldgasse 16, A-8010, Graz, Austria (Translated from Russian by Stoyan Sargoytchev)*
Abstract A few experiments, which confirm the validity of Absolute space-time theory against the Einstein's theory
In all (presented here) experiments for measurement the velocity of light, one measures the sum of the module of velocity components in two opposite direction. It is obvious that the average velocity will be constant (equal to the velocity of light) even if the velocities in the opposite directions are different.
Fig. 1 (removed due to obviousness) shows a typical (known from the prior art) experiment for measurement of the velocity of light. The light from a source S passing through the semitransparent mirror N, is cut in patches by the teeth of the rotating wheel C. The light patches pass the distance d to the mirror M and reflected back pass again through the teeth of the wheel C, then reflected by the semitransparent mirror N, arrive to the observer O. If for the total travel time, the wheel is rotated for one tooth, the observer will not see a light. Then the velocity of light is obtained by dividing the total light path 2d on the time the wheel rotates on one tooth.
The described experiment (Fig. 1) has been done for the first time by Fizo in 1849. Presently, thousands of radars operate on the Earth, but nobody (I repeat emphasizing - nobody) took effort to measure the velocity of light in this way, despite the fact that such experiment has been proposed by Michelson and Morley in 1887, after observing a null result by the Michelson interferometer.
The arrangement of similar experiment is so simple that even a child, who understands the Fizo experiment could guess. Although, strangely enough, nobody in the world did not undertake such experiment, despite the fact that the technical difficulties are not so many.
Fig. 2 illustrates the experiment by which I measured the difference of the velocity of light between two opposite directions [5, p. 68]. The light from a laser is divided in two beams by a semitransparent mirror. Then, after been reflected by other pairs of mirrors, they travel in opposite directions between two synchronously rotated disks C1 and C2 with holes near their periphery (in Fig. 2 the two beams are shown as emitted by two sources). The light cuts in patches by the say first rotating disk C1. The rotating disk C2 (additionally shortening the patches) transmits a comparatively more light if the light velocity in this direction is larger or less light if the light velocity is smaller. The distance between the two disks could no be very large (for a laboratory experiment) (Fizo used a distance of 8 km), so the difference between the light patches durations for both directions will be very small. Although, if using sensitive (high speed) photodiodes, one may determine the velocity vector of the absolute motion of the laboratory as vector component along the light path axis (defined by the shaft on which the disks are mounted). Following is the whole theory and experimental setup (with results).
* The article is published in the journal “Physical Thought in Russia” No. 2, 52-57, (1995).
1
Fig. 2. Coupled shutters experiment for measurement of the light velocity in one direction
The shaft is rotating by the motor put at the middle (on Fig. 2 the motor EM is shown at
the left side). The distance between the centre of the peripheral holes and the axis of rotation is 12
cm, while the distance between the two disks is 120 cm. The mutual angular position of the two
disks is such that when in rest the light passing through a whole width of the hole of one disk
(assuming a beam width equal to the hole's width) enlights the half width of a hole of the other
disk. The light patches cut by anyone of the disks (when rotating) must travel a finite time until
reaching the other disk, so if the rate of rotation is increasing, a less and less light will pass
through both disks. (If the cosine of the angle between the shaft axis and the vector of the
laboratory motion through the absolute space is small, the two light patches arriving at the
observers O1 and O2 will get a slightly different widths. (This difference will be larger for larger
rotation rate and distance d). Let for convenience denote the hole in the left-hand wheel
"escaping" and in the right-hand wheel - "approaching".
Let us admit that the wholes are rectangular, i. e. the laser beams have a rectangular section
and uniform light distribution in that section (this considerations, used for simplicity, do not affect
the final expressions, if the beams are ordinary laser beams). The current I generated in each
photodetector will be proportional to the width of the light patch, b, when the shaft is rotating, i. e. I~b. When the rate of rotation is increased on ∆N RPS , the width of the light patch at the
"escaping" whole will become b ∆b , while at the "approaching” hole it will be b + ∆b . The corresponding currents will be respectively proportional (I ∆I ) (b ∆b) and ,
(I + ∆I ) (b + ∆b) so we have
db = b(dI I )
(42)
where: dI - is the half of the current difference measured from both photodetectors.
If rotating initially the shaft with the disks in one direction with a speed of ∆N 2 RPS and
after that in the opposite one with a speed of ∆N 2 RPS , this corresponds to a change of the
angular velocity by ∆N RPS , so we have
2
db = (d c)2π (∆N )R
(43)
(where: R is a distance between the holes and center of the disk, c is the velocity of light)
Then for the velocity of light in one direction we get
c = 2π (∆N )Rd I
(44)
b ∆I
If the velocity of light in one direction is c-v, while in other is c+v, then the current
changes (due to ∆N ) will be respectively, (dI + δ I ) and (dI δ I ) and we will have
c
υ
=
2π (∆N )Rd b
∆I
I +δ
I
;
c
+υ
=
2π (∆N )Rd b
∆I
I −δ
I
(45)
.
From these two equations we get the final result:
υ = (δ I ∆I )c
(46)
The method of measurement of the currents ∆I and δ I is following. One changes the rotational speed of the shaft by ∆N (400 RPS) and measures the current change ∆I (∆I ± δ I ) , for each
detector. After that, one measures the difference between both changes of the currents. I use a
differential way for measurements the current difference by putting the currents from both photodetectors through a galvanometer. In order to measure 2∆I , I arranged the disk in a way that the far holes for one disk are "escaping" but for other - "approaching". In order to measure 2δ I , I
arranged the disk in a way that both beams are either "escaping" or "approaching". (In fact instead of changing the RPS he uses a constant 200 RPS, but rotating once clockwise and then counterclockwise, in which way the expressions (45 are valid).
The measurement of the current difference ( 2∆I ) I did once obtaining 2∆I = 105 µ A .
The measurement of the current difference ( 2δ I ) I did from 9th to 13th February 1984 in Graz (Austria, ϕ = 470, λ = 15026' ), taking data every 2 even hours. Since I did the experiment alone,
some hours in some days are omitted. The instrument shaft has been aligned in a North-South
direction. For these five days I obtain a quasi-sinosoidal curve with two maximal current
differences (2δ I )a = 120 nA and (2δ I )b = 50 nA ) for the standard time hours, tst, which
(together with the estimated probable errors) corresponded to two maximal projections of the
absolute velocity of the Earth along the axis of the instrument for twenty-four hour period:
υa = 342 ± 30 km / s ,
(tst )a = 3h ± 1h
υb = +143 ± 30 km / s ,
(tst )b = 15h ± 1h
(47)
When 2δ I has extremum, the absolute velocity of the Earth lie on the plane of the laboratory
meridian (Fig. 3). The velocity components pointing to North are assigned positive, while components pointing to South - negative. I marked by υa , the velocity component with the
smaller module. When the two beams pass through the "escaping" holes, then if the absolute velocity component points to North, the "north" photodiode generate less current than the "south"
one (in respect to the case when the absolute velocity component is perpendicular to the instrument axis). It is necessary to mention that in Fig. 3 both velocity components are shown as positive, pointing to the North, but in fact the component υa was negative.
3
Fig. 3 The absolute velocity of the Earth and the vector components in the horizontal plane at the moment when the absolute velocity is parallel to the meridian plane.
It is evident by Fig. 3 that both velocity components of the Earth in the horizontal plane of
the laboratory, υa and υb a related to the module of the absolute velocity by the equations
υa = v sin (δ ϕ ) ,
υb = v sin (δ + ϕ )
(48)
where ϕ is the latitude of the laboratory and δ is the declination of the velocitys apex.
From this one obtains
υ = υa2 + υb2 2υaυb (cos2 ϕ sin2 ϕ )1 2
(49)
2sinϕ cosϕ
tanδ = υb + υa tanϕ υb υa
Obviously, the apex of the absolute velocity points to the laboratory meridian. Consequently, the right ascension of the apex will be equal to the local sidereal time of registration of υa . Since, the time accuracy of the υa was +/- 1 hr, it was enough to calculate with
accuracy no better than +/- 5 min) the sidereal time tsi of registration, taking into account that the sidereal time at a midnight is as follows:
22 сентября - 0h 22 октября - 2h 22 ноября - 4h
23 марта - 12h 23 апреля - 14h 23 мая - 16h
4
22 декабря - 6h 21 января - 8h 21 февраля - 10h
22 июня - 18h 23 июля - 20h 22 августа - 22h
The local sidereal time of registration of va, (i.e. the right ascension of the apex of the
absolute velocity) was calculated by taking into account the local sidereal time at midnight on the
February 11 (a date in the middle of my observational period, which appears 21 days after the
midnight of January 21) was 8h+1h24=9h24m. At 3:00 central European time (the standard time of Gratz) on February 11, the local sidereal time at 150 meridian was
9h24m+2m=12h+26m~12.5h. This was the right ascension of the apex of the absolute velocity.
Inserting the data from (47) into (49), I obtained the absolute velocity vector of the Earth in
Equatorial coordinates (for the mentioned observational time period)
I must say at the end (see Fig. 2) that the coupled shutters experiment can be realized also
by arranging deviated paths adjustable by micrometric screws V1 and V2, as shown in Fig. 2. and
using a galvanometer as a null detector connected between both photodetectors. It is obvious that
if we make the current through the galvanometer zero by adjusting the deviated paths, the total
path lengths will be respectively, d1 = d + a , d2 = d + a , where a is the deviated path length.
Then turn the instrument on 180 deg, in order to make the current difference again zero, we must
change the paths to
d1'
=
d (1
υ 2
c
)
+
a
d
' 2
=
d (1 +
υ 2
c
)
+
a
(Changing the path in fact changes the pulse duration of the light patches). When the projection of the absolute velocity of the laboratory on the shaft axis is aligned
from right to left (see Fig. 2) the change of one of deviated the paths by the micrometer screw is
related to the velocity by the expression
∆d = d2' d1' = 4(υ c)d
(51)
For v=300 km/s and d=120 cm, the corresponding distance change by the micrometer
screw is ∆d = 4.8 mm .
In 1973 in Sofia (Bulgaria), I did an experiment with rotated coupled mirrors [10]. It has not been accurate enough, so I measured only the maximum of the projected absolute velocity of the Earth along the instrument axis in the order of v=139+/-100 km/s. (The azimuth was 84 deg).
In 1975/76 in Sofia I did another experiment with coupled mirrors interferometer [11], which was much more accurate. Making measurements for 6 months, I obtained an absolute velocity of our Sun v=303+/-20 km/s for the apex of this velocity in equatorial coordinate system α = 13h23m ± 20m , δ = 230 ± 40 .
References: [1] Marinov S. Eppur si muove (East-West, Graz, 1987), first ed. 1977 [2] Marinov S. Classical Physics (East-West, Graz, 1981). [3] Marinov S. Divine Electromagnetism (East-West, Graz, 1993)
5
[4] Marinov S. The Thorny Way of Truth, part IV (East-West, Graz, 1989) [5]. Marinov S. The Thorny Way ot'Truth, part II (East-West, Graz, 1986) [6] Marinov S. The Thorny Way ot'Truth, part VII (East-West, Graz, 1990) [7] Marinov S. Nature 322, p. x (21 August 1986) [8] Marinov S. New Scientist 112, 48 (1986) [9] Rindler W.American Journal ot'Physics 57, 993 (1989) [10] Marinov S. Czechoslovak Journal of Physics B24,965 (1974) [11] Marinov S. General Relativity and Gravitation 12, 57 (1980) [12] Marinov S. Indian Journal of Theoretical Physics 31,93 (1983) [13] Kennard R. Philosophical Magazine 33,179 (1917) [14] van Bladel J. Relativity and Engineering (Springer, Berlin, 1984) [15] Marinov S. The Thorny Way ot'Truth, part I (East-West, Graz, 1988), first ed. 1982. [16] Scott W.T. The Physics of Electricity and Magnetism (John Wiley, New York, 1966) [17] Dasgupta B.B. American Journal ot'Physics 52, 258, (1984) [18] Rowland H.A. Sitzungsberichte der k. Akademic der Wissenschaften zu Berlin, p.211 (1876) [19] Ландау Л.Д. и Лифшиц Е.М. Электродинамика сплошных сред (изд. "Наука", Москва, 1973) [20] Marinov S. Deutsche Physik 3(12), 53 (1994) [21] Marinov S. Deutsche Physik 4(13), 31 (1995) [22] Marinov S. Deutsche Physik 3(9), 17 (1994) [23] Marinov S. Deutsche Physik 3(10), 8 (1994) [24] Marinov S. Deutsche Physik 3(11), 40 (1994) [25] Marinov S. Deutsche Physik 3(12), 13 (1994) [26] Marinov S. Deutsche Physik 4(13), 15(1995)
6