Transport for London London Underground Category 1 Standard 1-026 Topographical Surveys and Mapping Issue No.: A2 MAYOR OF LONDON Issue date: Review date: March 2011 March 2016 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 Contents 1 Purpose ______________________________________________________________________ 3 2 Scope _______________________________________________________________________ 3 3 Requirements _________________________________________________________________ 3 3.1 London Survey Grid and datum ______________________________________________ 3 3.2 Ordnance Survey mapping _________________________________________________ 6 3.3 Topographical surveys _____________________________________________________ 7 3.4 Digital tunnel outline maps __________________________________________________ 9 3.5 Information management __________________________________________________ 11 3.6 Evidence of compliance ___________________________________________________ 11 4 Responsibilities _______________________________________________________________ 11 5 Supporting information _________________________________________________________ 12 5.1 Background ____________________________________________________________ 12 5.2 Safety considerations_____________________________________________________ 12 6 Reference Section_____________________________________________________________ 12 6.1 References_____________________________________________________________ 12 6.2 Abbreviations ___________________________________________________________ 12 6.3 Definitions _____________________________________________________________ 13 6.4 Technical content manager ________________________________________________ 14 6.5 Document history ________________________________________________________ 14 7 Attachments _________________________________________________________________ 15 7.1 London Survey Grid Scale Factors __________________________________________ 15 7.2 British National Grid (OSGB36) to London Survey Grid transformation blocks _________ 16 7.3 Factors for conversion between London Survey Grid and British National Grid ________ 17 7.4 London Survey Grid to JLE grid transformation block ____________________________ 18 7.5 Factors for conversion between London Survey Grid and JLE grids _________________ 19 7.6 Primary Control Survey Stations ____________________________________________ 20 7.7 Form to request the supply of Ordnance Survey digital data _______________________ 21 7.8 Typical items for inclusion in a model survey specification ________________________ 22 7.9 Survey station records ____________________________________________________ 24 7.10 Sample survey reference box ______________________________________________ 26 7.11 The Ordnance Survey Contractor Licence Agreement ___________________________ 27 Reference: 1-026 A2 Page 2 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 1 Purpose 1.1 The purpose of this standard is to define the requirements for and the procedures for performing and recording topographical surveys and to define the controls on the use of Ordnance Survey (OS) mapping. 2 Scope 2.1 The scope of this standard is to define: a) the requirements for topographical surveys and mapping performed by LU and its Suppliers surveying LU fixed assets; b) the requirements for topographical surveys and mapping for projects promoted by LU or its Suppliers on land and assets not currently owned by LU and; c) the procedures to control the use of OS mapping and other OS survey products that are licensed to LU. 2.2 This standard replaces 1-026 A1 3 Requirements 3.1 London Survey Grid and datum 3.1.1 3.1.1.1 London Survey Grid (LSG) definition All topographical survey and mapping work shall be reported on the London Survey Grid. Note: The London Survey Grid is a Transverse Mercator Projection with parameters chosen to minimise grid distortion caused by the Earth’s curvature over the LU area. The distortion is such that for large portions of the area projection corrections can be ignored. The Grid was formerly known as the LU Grid, the LUL Grid or the Crossrail Grid A network of primary survey stations with London Survey Grid co-ordinates has been established across London. 3.1.1.2 LSG height datum shall be used. The LSG height datum level is set at approximately 100m below OS Datum at Newlyn. Note: The LSG height datum is an orthometric height datum chosen to provide positive values for areas of interest to LU. This datum is realised by the network of OS benchmarks that have been connected by spirit levelling to LU survey control points. . In areas that will interface with Crossrail projects the Crossrail First Order benchmarks should be used. Trials in 2009 indicated that GPS survey heights can be transformed using the Ordnance Survey Geoid Model 2002 (OSGM02), plus the 100m shift, to produce acceptable LSG Height Datum values Reference: 1-026 A2 Page 3 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 The London Survey Grid is defined by the following parameters: Parameter Value Spheroid WGS 84 Semi major axis 6,378,137.000m Semi minor axis 6,356,752.3142m 1/f (f = earth’s flattening) 298.25722356300 e 0.00669437999013 Datum Xrail84 * Projection Transverse Mercator Central meridian W000°-09’-30” Latitude of true origin N051°-10’-00” Easting of true origin/ central meridian 78,250.000m Northing of true origin -2,800.000m Central meridian scale factor 0.9999999  Xrail84 * = Datum as derived by the Crossrail project in 1984. 3.1.2 Grid computation 3.1.2.1 Distances shall be reduced to the WGS 84 spheroid. 3.1.2.2 The London Survey Grid scale factors given in Attachment 7.1 shall be used. 3.1.3 Relationships between London Survey Grid and other grids 3.1.3.1 Ordnance Survey grid (also known as the British National Grid or OSGB36) 3.1.3.1.1 The formulae in Tables 1 and 2 in Attachment 7.3 shall be used for conversion of OS mapping to and from London Survey Grid within the areas shown in Attachment 7.2. These formulae are accurate to a commensurate standard as the OS mapping ie +/400mm. 3.1.3.1.2 To obtain more precise conversions of existing survey information held on the OS grid a local best fit formula shall be derived from the nearest primary or other common survey control stations. 3.1.3.2 JLE grid The formulae in Tables 3 and 4 in Attachment 7.5 shall be used for conversion of JLE digital data to and from London Survey Grid within the areas shown in Attachment 7.4. Note: Automation of conversion. LU holds a grid converter utility designed to convert MicroStation 2D and 3D design files from one co-ordinate system to another. It will change a file’s scale, rotation, location, working units and global origin. 3.1.4 3.1.4.1 Control surveys Primary Control stations consist of the original control points that were used as a basis for the Crossrail and Earth Structures Projects and were confirmed by the 2002 reobservation programme. These are considered to be permanent points in long term stable locations. The co-ordinate values shall not be changed without an amendment to this standard. These surveys have been computed as a single coherent system known as the London Survey Grid based on WGS84. Transformation parameters have been established to the National Grid (OSGB36). In 2002 a re-observation program was carried out by LU which proved the consistency of the original work and established transformation parameters to ETRS89. Further analysis by Prof Marek Reference: 1-026 A2 Page 4 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 Ziebart of University College London in April 2009 confirmed the transformation parameters. The list of Primary control points is included as Attachment 7.6 Note: Primary Control Surveys have been carried out for the Crossrail Project and the LU Earth Structures Project. 3.1.4.2 Secondary control points consist of control schemes that are based on Primary control and have been adjusted by a rigorous method. These control points shall be permanent points in long term stable locations. The co-ordinate values may be varied as a result of re-observation and re-computation. Such variations shall only be introduced after the LU Land Survey Manager has notified all parties that have received a controlled issue of this information and no objections have been raised. Secondary control points shall be the minimum requirement for surveys in project interface areas. 3.1.4.3 Third order control points consist of control schemes that are based on any combination of Primary, Secondary or Third Order control and have been adjusted by a rigorous method. The control points shall be established to be durable and stable for the duration of the project. The project surveyor may only vary the co-ordinate values as a result of re-observation and re-computation in which case the point will be renumbered. The LU Land Survey Manager shall distribute revised values to parties that have received a controlled issue of this information. 3.1.4.4 Fourth order control points consist of control schemes that are based on any combination of Primary, Secondary or Third Order control. The control points may be in situation where the durability or stability is doubtful or where conditions have prevented a rigorous regime of observation and computation. The project surveyor may vary the co-ordinate values as a result of re-observation and re-computation. The LU Land Survey Manager shall not further distribute this information. 3.1.5 GPS and ETRS89 The following Seven Parameter Transformation shall be used when converting ETRS89 data onto the London Survey Grid based on the Geoid model OSGM02 Method Rotation about x axis Rotation about y axis Rotation about z axis Translation along x axis Translation along y axis Translation along z axis Scale factor (PPM) Seven Parameter -0°00'03.577824" 0°00'03.484437" 0°00'02.767646" 19.019m 115.122m -97.287m 18.60847540 Note: Note: The convention used for the rotations is that a positive rotation acts in a clockwise sense as viewed along the rotation axis looking towards the origin. Checks should be made to ensure that this notation is used correctly. GPS has been used to establish the entire primary control network, and is now routinely used for survey work. The transformation parameters between London Survey Grid and ETRS89 allow the use of recorded base station data from the National GPS Network service. Reference: 1-026 A2 Page 5 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 3.2 Ordnance Survey mapping 3.2.1 3.2.1.1 Supply of data LU shall supply OS data for use on projects related to LU infrastructure and operations. 3.2.1.2 LU departments and suppliers wishing to obtain OS digital data and copyright licensing shall contact the LU Land Survey Data Manager. 3.2.1.3 Requests shall be submitted in the form given in Attachment 7.7 3.2.1.4 Suppliers shall enter into a Contractor Licence Agreement with the LU Land Survey Data Manager and abide by the copyright conditions as described in the Appendix 1 Licensed Use of the Public Sector Mapping Agreement (PSMA) Member Licence. The current form of Contractor Licence Agreement and copyright conditions are to be found in Attachment 7.11. 3.2.1.5 The recipient of data issued by LU shall acknowledge receipt within 10 working days. 3.2.1.6 The LU Land Survey Data Manager shall maintain records of requests for OS data and issue data in a controlled manner. Note: LU has a licence for the business use of OS digital data, which falls under the Copyright, Designs and Patents Act. Failure to comply with this procedure could lead to an infringement of Crown copyright which is a criminal offence under the Act, and would also lead to the loss of LU’s licence and expose the company to civil proceedings for damages. 3.2.2 3.2.2.1 Copyright requirements LU is a party to the TfL member licence to use OS data under the PSMA for the supply and use of digital data and licensing of copyright works. 3.2.2.2 Users of OS data shall abide by the terms of the agreement which shall be for Internal Business Use (including display and promotion) and limited internet applications only. Note: There is a Public Sector Mapping Agreement between the DCLG and OS for the supply of OS mapping data to all public bodies. LU receives data licensed under this agreement through TfL. The Public Sector Mapping Agreement, which may be varied from time to time, at present, includes the provision of the products listed in table below. Additional products are now made available free to use known as OS Open Data. All products are available free of charge and can be supplied as national coverage. The Public Sector Mapping Agreement, which may be varied from time to time, at present, covers the provision of the following: PSMA data Product MasterMap; Topography MasterMap; Integrated Transport Network inc. Road Routing Information 1:10,000 Raster 1:50,000 Raster Update Cycle On Line, Change only update On Line, Change only update Annual, Change only update Annual, Change only update Notes To be withdrawn in 2013 Reference: 1-026 A2 Page 6 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 PSMA data Product Address-Point Code Point Code Point with Polygons 1:25,000- Raster Vector Map Local OpenData Product 1:50,000 Scale Gazetteer 1:250,000 Colour Raster Boundary-Line Code-Point Open Land-Form Panorama Meridian 2 MiniScale OS Locator Strategi Vector Map District Street View Update Cycle Quarterly Quarterly 6 Monthly Annual Annual Update Cycle Annual, Change only update Annual 6 Monthly Quarterly Not Maintained 6 Monthly Annual 6 Monthly Annual Not specified 6 Monthly, Change only update Notes To be replaced by National Address Gazetteer in 2011 Notes 3.3 3.3.1 3.3.2 3.3.3 Note:         Topographical surveys The Supplier shall appoint a Survey Co-ordinator / Project Manager The Supplier shall advise the LU Land Survey Manager of the nominated Survey Coordinator/Project Manager. The Supplier’s Survey Co-ordinator shall prepare and promote model specifications for the various types of survey carried out. The following surveys are typically used: Land surveys; Building surveys: Un-connected survey – Using simple methods which do not enable one part of the survey to be related to another, this would not normally be acceptable for LU work; Semi-connected survey – One floor (normally the ground floor) is surveyed with all parts connected by instrumental control. Other floors are matched by assuming verticality of common features; Fully connected survey – All floors are instrumentally related to a common survey control framework. Buried utilities surveys: Record information – Underground service information to be taken from statutory or other authorities' record drawings and plotted to agree as closely as possible with surveyed surface features; Direct visual surveys – Accessible inspection chamber covers should be lifted where permissible and services positively identified; Reference: 1-026 A2 Page 7 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011         3.3.4 3.3.5 Direct visual surveys supplemented by record drawings – Accessible inspection chamber covers should be lifted where permissible and services positively identified. Routes of services between access points to be taken from record drawings and plotted to agree as closely as possible with surveyed surface features and trench scars where obvious; Full investigation including electronic tracing – Services to be fully investigated by visual survey supplemented by electronic, or other tracing of inaccessible routes. Track Surveys Detailed surveys of track alignment for track design purposes Clearance surveys to establish the clearance between line side objects and rolling stock Scanned Surveys Track trolley mounted scan surveys Tripod mounted static scan surveys The items listed in Attachment 7.8 are typical items for inclusion in the model specifications. The Supplier shall establish procedures to record and monitor survey activities. 3.3.6 3.3.6.1 Survey control The Supplier’s Survey Co-ordinator shall obtain a list of relevant LU survey stations from the LU Land Survey Data Manager. 3.3.6.2 The Suppliers Survey Co-ordinator shall advise the LU Survey Manager in writing of any inconsistencies or inaccuracies found in the information supplied by the LU Survey Data Manager. 3.3.7 Survey requirements The survey requirements will be defined in the site specific survey specification. The following should be used as guidance for minimum standards: 3.3.7.1 The maximum planimetric error between permanent survey control stations shall not exceed 1 part in 20,000 for distances exceeding 200 metres. For shorter distances the maximum error shall not be greater than 10mm. 3.3.7.2 The height difference between any two points used as permanent bench marks shall not be in error by more than ± 12 x k mm, where k is the square root of the distance in kilometres between the points being considered, or ± 5mm, whichever is the greater. 3.3.7.3 For Land Surveys: a) The accuracy of planimetric detail shall be such that the plan position of any well defined point of detail shall be correct to within 0.3mm r.m.s.e. at the plan scale when checked from the nearest permanent control station; b) Ground survey spot levels on hard surfaces shall be correct to ± 10mm r.m.s.e. and elsewhere to ± 50mm r.m.s.e., except on ploughed or otherwise broken surfaces; c) At least 90% of all contours shall be correct to within one half of the specified contour interval; d) Any contour which can be brought within this vertical tolerance by moving its plotted position in any direction by an amount equal to 1/10th of the horizontal Reference: 1-026 A2 Page 8 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 3.3.7.4 distance between contours, or 0.5mm at plan scale, whichever is the greater, shall be considered as correct. For Building Surveys: a) The maximum error between permanent survey control stations shall not exceed ± 5mm or 1 part in 10,000 for distances exceeding 50 metres; b) The height difference between any two points used as permanent bench marks shall not be in error by more than ± 3mm on any floor or by more than ± 1.5mm per metre of height between floors; c) In fully-controlled surveys the absolute plan position of well defined detail shall be accurate to ± 15mm at 1:50 scale or ± 30mm at 1:100 scale, when checked from the nearest survey control station on that floor; d) Directly measured figured dimensions shall be quoted to the nearest 0.01 metre; e) The quoted level of any feature relative to the nearest bench mark on that floor shall be to ± 5mm. 3.3.8 Survey report 3.3.8.1 The Supplier shall ensure a technical report is prepared for each survey. 3.3.8.2 The technical report shall confirm that the survey meets the requirements as laid down in the site specific survey specification. Note: The technical report is intended to assist future users in making a judgement about the suitability, quality and accuracy of the survey. 3.3.8.3 The report shall contain details of control points established during the survey. 3.3.8.4 A Survey Station record sheet shall be prepared for each control point which shall contain the information highlighted in Appendix 7.9 and may also contain additional information and photographs. 3.3.8.5 Survey Control point details shall be delivered as a spreadsheet in the form given in Attachment 7.9. 3.3.9 3.3.9.1 Retention of survey information Survey information shall be retained in a form compliant with the LU Standard 1-691 (Information). 3.3.9.2 CAD information shall comply with LU Standard 1-037 (Computer Aided Design Data). 3.3.9.3 The Supplier’s Survey Co-ordinator shall be the custodian of the survey information, and shall supply a copy of the information to the LU Land Survey Manager within one month of completion of the survey. Note: The LU Land Survey Manager may release this information, without reference to the Supplier, or their Surveyor, subject to such rules and conditions as may be determined by LU and the requirements of the Freedom of Information Act and the Environmental Information Regulations. Surveys shall be procured so that the IPR in the survey information is vested in LU and IPR issues are not an inhibitor to the free use of survey information within LU.. 3.4 Digital tunnel outline maps Note: The LU Land Survey Manager is required to maintain maps to show the outline of the London Underground tunnels to supply to internal and external bodies legitimately requiring information about the location of LU infrastructure. Reference: 1-026 A2 Page 9 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 3.4.1 3.4.1.1 Preparation of digital tunnel outline maps Tunnel outline map files shall be prepared as digital files in Bentley MicroStation Design file (.dgn) format. 3.4.1.2 Individual files shall represent a single line of the Underground network. 3.4.1.3 Separate tunnel outline map files shall be held in two dimensional and three dimensional design file format. 3.4.1.4 Filenames shall use the three letter abbreviation for the line followed by a 2 or 3 to indicate a 2D or 3D file followed by TNL to indicate a Tunnel file, followed by the extension .dgn to indicate a MicroStation design file, e.g. BAK2TNL.dgn 3.4.1.5 The running tunnels and cross passages shall be represented by separate lines showing: a) intrados at horizontal axis; b) extrados at horizontal axis; c) extrados at tunnel crown; d) intrados at tunnel crown; e) running edge of rails. 3.4.1.6 Tunnel crown levels related to LU Datum shall be recorded at significant points on the tunnel maps, e.g. changes in section. 3.4.1.7 The following shall be recorded for tunnel linings at change of section and at no greater than 200m intervals: a) construction material; b) bolted or expanded; c) nominal internal diameter; d) nominal external diameter. 3.4.1.8 A survey reference box shall be displayed adjacent to the survey area, summarising relevant survey reference information. Note: This information should include: a) survey drawing numbers, dates, authors; b) revision and approval dates; c) general notes and remarks. A sample survey reference box is shown in Attachment 7.10. 3.4.1.9 The extent of each survey shall be shown with survey flags, annotated where necessary to identify overlapping surveys. 3.4.2 Updating tunnel outline map The Supplier shall notify LU of updates of the tunnel maps produced from information from measured surveys within one month following their preparation. Reference: 1-026 A2 Page 10 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 3.5 Information management 3.5.1 3.5.1.1 Survey data The Supplier shall deliver a copy of all completed survey reports, survey drawings and the relevant method statement and specification to the LU Land Survey Manager. 3.5.1.2 All land, utility and building surveys shall be delivered in digital form as two or three dimensional Bentley MicroStation Design File (.dgn) format and include details of how the drawing is structured (levels, colours, style, etc.). 3.5.1.3 Survey information shall include metadata to enable the data to be held in the LU CAD Document Management System conforming to ISO 19115:2003 Geographic information – Metadata. 3.5.2 3.5.2.1 Survey control information The LU Land Survey Data Manager shall hold and maintain the information as listed in Attachment 7.9 about the LU survey stations. 3.5.2.2 The LU Land Survey Data Manager shall prepare and maintain a network diagram of the LU survey stations. 3.5.2.3 The LU Land Survey Data Manager shall make available details of relevant LU survey stations and the relevant part of the network diagram to surveyors who have been commissioned to carry out survey work for LU. 3.5.2.4 The LU Land Survey Data Manager will assign an accuracy classification to each survey control point, which will be issued to users on request. 3.5.2.5 The Supplier shall advise the LU Land Survey Data Manager in writing of any inconsistencies or inaccuracies in the information supplied by the LU Land Survey Coordinator. 3.6 Evidence of compliance Compliance with the requirements of this standard shall be demonstrated to LU by each party contracted to LU. Additionally LU may audit compliance as part of its surveillance regime. 4 Responsibilities 4.1 The LU Land Survey Manager is the custodian of LU survey information. He shall also be responsible for ensuring that the digital tunnel outline maps are updated to include new information from each survey completed. 4.2 The Supplier is responsible for appointing a competent Survey Co-ordinator/Project Manager. 4.3 The Supplier’s Survey Co-ordinator/Project Manager is responsible for preparing specifications for survey work, approving Surveyor’s Method Statements and the design of survey ground marks. He shall receive data from the Supplier, retain for his record and pass on to the LU Land Survey Manager. He shall update the digital tunnel outline maps and inform LU of the update. Reference: 1-026 A2 Page 11 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 5 Supporting information 5.1 5.1.1 5.1.2 5.2 5.2.1 Background This standard is one of a suite of standards produced by the LU Project Directorate, Engineering Information Manager. The suite consists of standards as follows: Standard Number Title 1-026 Topographical Surveys and Mapping Safety considerations The correct use of survey information and the London Survey Grid is important in establishing the position of the LU Infrastructure especially where this is underground. The use of the incorrect survey grid has been established as a contributory factor involving asset damage and service disruption. 6 Reference Section 6.1 References 6.1.1 National standards Document no. Title ISO 19115 Geographic Information - Metadata 6.1.2 LU company documents Document no. 1-037 1-622 Title Computer Aided Design Data Glossary of terms and abbreviations 6.2 Abbreviations The following abbreviations are created: a) within London Underground’s Glossary of Terms (1-622) (a Category 1 Standard); b) from published sources that are clearly identified. Abbreviation CAD DGN ETRS89 GPS IPR JLE LU OS OSGM02 Definition Computer Aided Design Intergraph MicroStation Design Format European Terrestrial Reference System 1989 Global Positioning System Intellectual Property Rights Jubilee Line Extension London Underground Ordnance Survey Ordnance Survey Geoid Model 2002 www.ordnancesurvey.co.uk/gps/docs/osgm_report.doc Source a a a a a a a a b Reference: 1-026 A2 Page 12 of 27 Abbreviation r.m.s.e. WGS 84 Definition Root mean square error World Geodetic System 1984 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 Source a a 6.3 Definitions The following topic specific definitions are created: a) within London Underground’s Glossary of Terms (1-622) (a Category 1 Standard); b) from published sources that are clearly identified. Term Definition Source Bench mark a fixed point used for levelling whose height above datum is a known Custodian - a person nominated to be responsible for nominated a documents and for their maintenance and update Design file Computer generated data file containing constituent CAD data a file elements of the drawing Easting distance in metres in the east or west direction from the false a origin of the grid ETRS89 The European Terrestrial Reference System 1989 is the a standard precise GPS co-ordinate system throughout Europe. In 2000, the difference between the WGS84 and ETRS89 co- ordinates was about 25 cm, and increasing by about 2.5 cm per year. ETRS89 has been officially adopted as a standard co-ordinate system for precise GPS surveying by most national mapping agencies in Europe. JLE Grid a ‘flat earth’ projection. With an extent of 11 kilometres the a maximum distortion due to ignoring effects of the earth’s curvature is 1 part in a million. Original observation and computations were made in 1990. Additional observations were taken in 1992 and the primary network re-computed. Coordinates were linked to the OS values at Cheviot House. London Survey a transverse Mercator projection with parameters chosen to a Grid minimise grid distortion caused by curvature of the earth over the LU area LU Land Survey the person appointed by LU to be the custodian of land survey a Manager information for LU. LU survey station a permanent ground mark co-ordinated to the London Survey a Grid and contained on the LU Land Survey Co-ordinator’s controlled list of survey stations MicroStation proprietary two and three dimensional CAD drafting software a package supplied by Bentley Systems, Inc. Network diagram a diagram, not necessarily to scale, showing the relationship a between survey stations Northing distance in metres in the north or south direction from the false a origin of the grid OS grid is the national grid co-ordinate system for Great Britain. The a co-ordinate system is based on the transverse Mercator projection, with parameters chosen to cover the whole of Great Britain. More correctly known as British National Grid (BNG) or OSGB36 Scale factor ratio of a distance on the spheroid to that on the grid a Reference: 1-026 A2 Page 13 of 27 Term Supplier Surveyor True origin Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 Definition Source Supplier to London Underground, the primary organisation or a individual that is selected to deliver a product, service or facility to London Underground and contracting directly to London Underground. This includes Consultants, Contractors and PFI Contractors and excludes organisations or individuals selected by and contracting directly to them. an external company or LU manager appropriately qualified a and experienced to undertake land survey work the point where the spheroid and grid are coincident, hence a grid north equals true north 6.4 Technical content manager Paragraph number Technical content manager All LU, Project Directorate, Engineering Information Manager 6.5 Document history Issue no R9 Date July 2007 Changes Standard 2-01030-004 re formatted and renumbered to 1-026, no technical changes have been made to the content other than changing references to other Standards where their numbers have changed. Author A1 October Authorised for use. Previous authorisation is 2007 valid A2 March Reviewed and revised to change from the term Richard Barrett 2011 LU Grid to London Survey Grid as per DRACCT No. 0329. Also, Incorporate G-026 into this standard to reflect current best practise in this specialist field and withdraw G-026. Reference: 1-026 A2 Page 14 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7 Attachments 7.1 London Survey Grid Scale Factors London Survey Grid eastings 48,000 49,000 50,000 51,000 52,000 53,000 54,000 55,000 56,000 57,000 58,000 59,000 60,000 61,000 62,000 63,000 64,000 65,000 66,000 67,000 68,000 69,000 70,000 71,000 72,000 73,000 74,000 75,000 76,000 77,000 London Survey Grid scale factor 1.0000111 1.0000104 1.0000097 1.0000090 1.0000084 1.0000077 1.0000071 1.0000065 1.0000060 1.0000055 1.0000049 1.0000045 1.0000040 1.0000036 1.0000031 1.0000028 1.0000024 1.0000021 1.0000017 1.0000015 1.0000012 1.0000010 1.0000007 1.0000005 1.0000004 1.0000002 1.0000001 1.0000000 1.0000000 0.9999999 Correction mm per km 11 10 10 9 8 8 7 7 6 5 5 4 4 4 3 3 2 2 2 1 1 1 1 1 0 0 0 0 0 0 London Survey Grid eastings 78,000 79,000 80,000 81,000 82,000 83,000 84,000 85,000 86,000 87,000 88,000 89,000 90,000 91,000 92,000 93,000 94,000 95,000 96,000 97,000 98,000 99,000 100,000 101,000 102,000 103,000 104,000 105,000 106,000 107,000 London Survey Grid scale factor 0.9999999 0.9999999 0.9999999 1.0000000 1.0000001 1.0000002 1.0000003 1.0000005 1.0000006 1.0000008 1.0000011 1.0000013 1.0000016 1.0000019 1.0000022 1.0000026 1.0000029 1.0000033 1.0000038 1.0000042 1.0000047 1.0000052 1.0000057 1.0000063 1.0000068 1.0000074 1.0000080 1.0000087 1.0000094 1.0000101 Correction mm per km 0 0 0 0 0 0 0 0 1 1 1 1 2 2 2 3 3 3 4 4 5 5 6 6 7 7 8 9 9 10 Reference: 1-026 A2 Page 15 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.2 British National Grid (OSGB36) to London Survey Grid transformation blocks NOTE: This map contains coloured lines marking the boundaries of the transformation blocks. These may be obscured if this page is reproduced in black and white. Point A B C D E F G H I J K L M N O P Q Easting 538,000 517,000 517,000 518,000 518,000 519,500 519,500 522,000 522,000 523,000 523,000 529,000 529,000 540,000 540,000 539,500 539,500 British National Grid Co-ordinates Northing Point Easting Northing Point 197,000 R 538,000 185,000 II 197,000 S 538,000 205,000 JJ 185,000 T 556,500 205,000 KK 185,000 U 556,500 187,500 LL 184,000 V 557,500 187,500 MM 184,000 W 557,500 186,500 NN 182,500 X 556,500 186,500 OO 182,500 Y 556,500 178,000 PP 178,500 Z 540,000 178,000 QQ 178,500 AA 530,000 175,000 RR 177,500 BB 530,000 167,500 SS 177,500 CC 515,000 167,500 TT 175,000 DD 515,000 173,500 UU 175,000 EE 522,000 173,500 VV 182,500 FF 505,000 173,500 WW 182,500 GG 505,000 188,500 185,000 HH 513,500 188,500 Easting 513,500 517,000 517,000 495,000 495,000 493,500 493,500 495,000 495,000 550,000 550,000 505,000 504,500 504,500 505,000 Northing 187,500 187,500 202,500 202,500 199,250 199,250 198,250 198,250 188,500 167,500 178,000 174,500 174,500 177,000 177,000 Reference: 1-026 A2 Page 16 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.3 Factors for conversion between London Survey Grid and British National Grid North West area South West area Central area East area South area Rotation (Rot) 358°.55579884 358°.55810730 358°.55752333 358°.557282 358°.5600609 50 8 Scale factor (SF) 1.000254411 1.000243743 1.000192479 1.000146053 1.000217914 Shift Eastings -454195.142 -454182.581 -454157.420 -454133.105 -454163.487 Shift Northings -131867.340 -131886.233 -131872.044 -131861.837 -131899.767 P=SFxCos(Rot) 0.999936674 0.999927024 0.999875520 0.999829003 0.999902061 Q=SFxSin(Rot) -0.025209808 -0.025169252 -0.025178154 - -0.025134508 0.025181187 Note: Rotation is a conventional anticlockwise angle For converting British National Grid to London Survey Grid the conversion equations are: E.London Survey Grid = (E.British National Grid x P) - (N. British National Grid x Q) + shift Eastings N.London Survey Grid = (N. British National Grid x P) + (E. British National Grid x Q) + shift Northings South East area 358°.55962194 1.000152383 -454129.735 -131885.180 0.9999836358 -0.025140520 Table 1 Factors for conversion of British National Grid to London Survey Grid North West area South West area Central area East area Rotation (Rot) 01°.44420116 01°.44189270 01°.44247667 01°.44271751 Scale factor (SF) 0.999745653 0.999756316 0.999807558 0.999853968 Shift Eastings 450612.718 450610.266 450607.111 450603.379 Shift Northings 143236.271 143238.209 143235.329 143233.058 P=SFxCos(Rot) 0.999428078 0.999439752 0.999490721 0.999537011 Q=SFxSin(Rot) 0.025196986 0.025156987 0.025168464 0.025173833 Note: Rotation is a conventional anticlockwise angle For converting London Survey Grid to British National Grid the equations are: E. British National Grid = (E.London Survey Grid x P) - (N.London Survey Grid x Q) + shift Eastings N. British National Grid = (N.London Survey Grid x P) + (E.London Survey Grid x Q) + shift Northings South area 01°.439938901 0.999782133 450607.363 143239.590 0.999466418 0.025123557 South East area 01°.44037806 0.99984764 450602.420 143236.998 0.999531712 0.025132860 Table 2 Factors for conversion from London Survey Grid to British National Grid Note: Transformation blocks given in tables 1 and 2 have been created such that the differences along the boundary edges when using adjacent sets of conversion parameters is within the 1:1,250 mapping accuracy of 400mm, equivalent to 0.3mm at map scale. Reference: 1-026 A2 Page 17 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.4 London Survey Grid to JLE grid transformation block Reference: 1-026 A2 Page 18 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.5 Factors for conversion between London Survey Grid and JLE grids Rotation (Rot) Scale factor (SF) Shift Eastings Shift Northings P=SFxCos(Rot) Q=SFxSin(Rot) 358°.55814059 0.99999717553 66,231.840 m -7,897.815 m 0.9996805496 -0.0251624670 For converting JLE Grid to London Survey Grid the conversion equations are: E.London Survey Grid = (E.JLE grid x P) - (N.JLE survey grid x Q) + shift Eastings N.London Survey Grid = (N.JLE grid x P) + (E.JLE survey grid x Q) + shift Northings Table 3 Factors for conversion from JLE grid to London Survey Grid. Rotation (Rot) Scale factor (SF) Shift Eastings Shift Northings P=SFxCos(Rot) Q=SFxSin(Rot) 01°.44185941 1.00000282446 -66,409.786 m 6,228.771 m 0.9996861968 0.0251626091 For converting London Survey Grid to JLE Grid the conversion equations are: E.JLE grid = (E.London Survey Grid x P) - (N. London Survey Grid x Q) + shift Eastings N. JLE grid = (N. London Survey Grid x P) + (E. London Survey Grid x Q) + shift Northings Table 4 Factors for conversion from London Survey Grid to JLE grid. Note: The transformation parameters listed were produced from a survey linking 13 common survey control stations in March 1998. Checks at platform level were made between the London Survey Grid and JLE grid survey stations at Waterloo, London Bridge and Canada Water; the worst linear agreement being 20mm. Reference: 1-026 A2 Page 19 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.6 Primary Control Survey Stations Primary ID. Coldharbour Farm Woodoak Farm Northwood Potters Crouch Belmont Northwick Park Richmond Park Arkley Reservoir Parsonage Farm Pollards Hill CRP08 CRP09 Pole Hill Monkhams Hall London Cemetery Garland Hill Dog Kennel Hill Little Tawney Hall Romford Common Little Tomkyns Farm North Ockendon Primary ID. Coldharbour Farm Woodoak Farm Northwood Potters Crouch Belmont Northwick Park Richmond Park Arkley Reservoir Parsonage Farm Pollards Hill CRP08 CRP09 Pole Hill Monkhams Hall London Cemetery Garland Hill Dog Kennel Hill Little Tawney Hall Romford Common Little Tomkyns Farm North Ockendon London Survey Grid Easting Northing Level 46361.463 51436.772 269.250 53381.506 48723.612 181.780 59856.174 46617.755 172.620 62699.360 60269.761 218.110 66880.348 46173.863 205.120 67132.785 43064.558 159.280 68789.410 28207.392 156.040 72798.176 50771.145 244.790 73391.128 60967.109 210.250 80377.022 23572.176 164.900 85139.159 35988.862 138.710 89078.330 38845.733 121.470 89084.473 49493.790 191.350 89435.862 56969.529 182.990 92293.548 40746.816 113.570 97913.484 23544.634 180.510 98574.848 46845.271 184.500 101119.124 53502.584 171.720 103125.267 46081.679 171.540 107520.335 43599.754 174.690 110084.438 39449.241 British National Grid (OSGB36) 140.930 Easting Northing Level 495651.749 195811.887 169.250 502736.180 193277.140 81.780 509260.020 191335.609 72.620 511757.480 205051.440 118.110 516291.420 191068.930 105.120 516622.066 187967.597 59.280 518651.426 173160.233 56.040 522090.190 195812.700 144.790 522425.970 206018.180 110.250 530349.360 168818.410 64.900 534797.127 181348.683 38.710 538662.387 184303.243 21.470 538400.586 194946.428 91.350 538563.362 202427.410 82.990 541828.530 186284.370 13.570 547878.520 169231.370 80.510 547953.500 192538.250 84.500 550328.900 199256.600 71.720 552521.150 191889.650 71.540 556976.930 189519.450 74.690 559644.340 185435.160 40.930 ETRS89 Latitude Longitude 51o39'10.70333"N 51o37'44.19131"N 51o36'36.94875"N 51o43'58.97747"N 0 o37'07.46043"W 0 o31'01.61567"W 0o25'24.60943"W 0o22'59.03900"W 51o36'23.25284"N 0o19'19.52792"W 51o34'42.66530"N 0o19'06.05689"W 51o26'42.04359"N 51o38'52.32048"N 51o44'22.23903"N 51o24'12.32820"N 0o17'38.59546"W 0o14'12.27308"W 0o13'41.94128"W 0o07'38.68851"W 51o30'53.95951"N 0o03'31.45489"W 51o32'26.17548"N 0o00'06.85567"W 51o38'10.70718"N 51o42'12.56647"N 51o33'27.43244"N 51o24'10.22224"N 0o00'05.35162"W 0o00'13.78286"E 0o02'40.24986"E 0o07'28.51579"E 51o36'44.06493"N 0o08'07.56697"E 51o40'19.11488"N 0o10'21.35841"E 51o36'18.70046"N 51o34'57.63555"N 51o32'42.84291"N 0o12'03.85359"E 0o15'51.47932"E 0o18'03.29210"E Height 214.518 127.050 117.890 163.379 150.389 104.550 101.310 190.059 155.519 110.169 83.980 66.740 136.619 128.259 58.840 125.778 129.769 116.989 116.809 119.958 86.199 DESCRIPTION O.S. Pillar 2nd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket Brass Rivet O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket Brass Rivet O.S. Pillar 2nd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket Bolt Bolt O.S. Pillar 2nd.Order. Height to bracket O.S. Pillar 2nd.Order. Height to bracket Survey Bolt O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket O.S. Pillar 3rd.Order. Height to bracket Reference: 1-026 A2 Page 20 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.7 Form to request the supply of Ordnance Survey digital data Project Name ………………………………………….. Contact Name Organisation Name E-mail address PO Box Building Name / No. Street Post Town County Postcode Phone / Fax Originator / Authoriser Please complete details below of person in TfL requesting the data for their use or use by their contractors Contractor If data is requested for distribution to an external contractor complete their details below. OS Product MasterMap, Topography MasterMap, ITN MasterMap CAD version 1:10,000 Scale Raster 1:25,000 Scale Raster 1:50,000 Scale Raster 1:250,000 Scale Raster Address-Point Code Point with Polygons Code Point Boundary-Line Street View VectorMap Local Meridian 2 GZ GZ DGN TIF TIF TIF TIF CSV MID-MIF CSV NTF TIF GZ NTF Tick Formats Required DWG NTF NTF DGN Extent e.g. A tile list TQ3181 or London Borough Brent etc Special Requirements Grid System Updates Required Project End Date Other Requirements London Survey Grid Yes British National Grid No Note, all products are available in BNG, MasterMap CAD DGN is also available in LSG Reference: 1-026 A2 Page 21 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.8 Typical items for inclusion in a model survey specification Survey title Summary of requirements Description of the site to be surveyed Site hazards and access arrangements Survey control Survey grid and height datum to be used Horizontal control network, design and accuracy Vertical control network, design and accuracy Details of LU survey stations to be used Mapping Detail to be surveyed Accuracy Additional information required - e.g. names, type Digital data Data file structure Data standards Data transfer format Graphical definition requirement Presentation of final drawings Size Colour Number Material Programme Works programme Progress reports Method statement Survey title Survey organisation Project or job name Job Manager name Brief description and purpose of the survey Location of the survey Brief scope of work Personnel to be employed Equipment and resources to be used Detailed technical methodology Delivery schedule Quality checks to be applied Safety arrangements Reference: 1-026 A2 Page 22 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 Information and materials to be delivered Sample, proof and final data Return of information supplied by LU Technical report Survey registration number Survey title Survey organisation Project or job name Brief description and purpose of the survey Technical specifications for the work Agreed amendments and variations Variations to the accepted method statement The actual delivery schedule Quality management procedures employed with the results of tests carried out Horizontal and vertical network diagrams Abstracts of adjustments to observations carried out showing accuracy of data List and details of LU survey station and bench marks used List, details and description of all survey control points and bench marks established Bill of quantities Reference: 1-026 A2 Page 23 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.9 Survey station records Records should be submitted in a spreadsheet format with the column headings and field formats as shown below. Diagrams to be included in the survey station record should be in Bentley MicroStation Design file (.dgn) format, photographs may be from digital cameras or a scanned graphical image in TIF or JPEG format. All the fields listed should be included in the spreadsheet, the fields shown in bold must include data, the remaining columns are optional or may be completed subsequently. Column Name Format Description Example Field Obligation Length PGM ORG_EST_MARK Text Text ESTABLISHED_DATE MARK_DESCRIPTION Date YYYY_MM_ DD Text Easting Northing Height Grid Number (Double) Number (Double) Number (Double) Text Datum Text Location_Description Text DIAGRAM Logical Survey Station name Organisation establishing and checking the survey station Date survey station established Description of the ground mark Easting Northing Level Information to describe the spatial reference system Information to describe the vertical reference system Information to describe the location Yes / No CRP08 CROSSRAIL 1996_11_05 OS 3rd Order Roof Bolt 85139.159 35988.862 138.71 JLE ODN Lambeth North Station Concourse Y 32 Mandatory 50 Mandatory 10 Mandatory 50 Mandatory 10 Mandatory 10 Mandatory 8 Mandatory 12 Mandatory 12 Mandatory 100 Mandatory 1 Mandatory LCS Text Location Code M154 5 Mandatory ALIAS Text Project Description Text Alternate name or number Information to describe project Cheviot House Station Modernisation Project 32 Optional additional information 50 Optional additional information Reference: 1-026 A2 Page 24 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 Column Name Format Description Example Line_Owner LAST_VISIT_DATE STATUS Text Date YYYY_MM_ DD Text London Underground Line operating trains in location Date of last known visit Condition at last visit Jubilee 1996 ok Field Obligation Length Optional additional 25 information 10 Optional additional information 80 Optional additional information NOTES ACCESS_INST Text Text Details of any special condition Access instructions 24 hours notice required Tel Security office 0207 790 1818 80 Optional additional information 250 Optional additional information Diagram_Drawn_By Text Diagram_Drawn_Date Diagram_Verification_ By Date YYYY_MM_ DD Text Diagram_Verification_ Date Diagram_Rev Date YYYY_MM_ DD Text Author of witness diagram Date of drawing completion Authorising authority of witness diagram Date witness diagram was checked Revision of drawing CD 2010_12_25 AEL 2010_10 A 16 Optional additional information 10 Optional additional information 16 Optional additional information 10 Optional additional information 2 Optional additional information SIN CONTROL_ORDER HEIGHT_ORDER Grade Text Text Text Text PHOTO_Link Drawing_Link URL URL Code for LU job 1st Order, 2nd Order etc 1st Order, 2nd Order etc Confidence level in information A, B, C, D, N, S, P Link to digital photographs Link to Drawing file of station record sheet W124 2nd Order 3rd Order A http://intranet.mr.i nt http://intranet.mr.i nt 5 LU use only 9 LU use only 9 LU use only 1 LU use only 250 LU use only 250 LU use only Note: Confidence levels are selected from the lookup table in the Survey Control Database Reference: 1-026 A2 Page 25 of 27 7.10 Sample survey reference box No. AUTHOR DATE SURVEY/SOURCE DATA TUNNEL UPDATE INFORMATION REV DESCRIPTION Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 REF No. DATE AUTH. APP. COMMENTS Plan accuracy Level Accuracy File transfer format Reference: 1-026 A2 Page 26 of 27 Title: Topographical Surveys and Mapping Number: 1-026 Issue no: A2 Issue date: March 2011 7.11 The Ordnance Survey Contractor Licence Agreement Introduction Transport for London is a member of the Public Sector Mapping Agreement which licenses a range of Ordnance Survey data products for use within London Underground. This licence extends to use by London Underground’s contractors carrying out work for LU when the contractor enters into an OS Contractor Licence Agreement with LU. The contractor licence agreement may be downloaded from the Ordnance Survey website together with additional information. http://www.ordnancesurvey.co.uk/oswebsite/business/sectors/government/psma/index. html Reference: 1-026 A2 Page 27 of 27