zotero-db/storage/BQACAX6X/.zotero-ft-cache

1573 lines
53 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

A&A 563, A100 (2014) DOI: 10.1051/0004-6361/201321960 c ESO 2014
Astronomy A&strophysics
Detailed mathematical and numerical analysis of a dynamo model
Aditi Sood and Eun-jin Kim
School of Mathematics and Statistics, University of Sheffield, S3 7RH, UK e-mail: [smp11as;e.kim]@sheffield.ac.uk
Received 25 May 2013 / Accepted 31 December 2013
ABSTRACT
We investigate the role of nonlinear feedback by α-quenching, flux losses, and feedback by differential rotations in dynamo. Specifically, by studying the nonlinear dynamo model analytically and numerically, we unfold how frequency p of magnetic field, magnetic field strength |B|, and phase φ are influenced by different types of nonlinear feedback in the limit of a very weak mean and/or fluctuating differential rotation. We find that p and φ are controlled by both flux losses with no influence by α-quenching when there is no back reaction because of fluctuating differential rotation. We find a similar effect of poloidal flux loss and toroidal flux loss on p and |B| in the absence of a back reaction of shear. Their effect becomes totally different with the inclusion of this back reaction. Detailed investigations suggest that toroidal flux loss tends to have more influence than poloidal flux loss (with or without α-quenching) in the presence of fluctuating shear. Furthermore, the effect of α-quenching is boosted when combined with toroidal flux loss, indicating that the dynamic balance of dynamo is optimized in the presence of both α-quenching and flux loss. These results highlight the importance of nonlinear transport coefficients and differential rotation in the regulation of a dynamo.
Key words. dynamo stars: magnetic field stars: evolution stars: solar-type stars: rotation
1. Introduction
Over the decades it has been revealed through high-resolution observations that the magnetic field on the solar surface is very structured, consisting of small-scale, rapidly changing magnetic fields, which seem to emerge randomly and are highly variable. At the same time, solar magnetic field shows a remarkable degree of organization on a global scale, displaying the butterfly diagrams and polarity reversal with quite a regular cycle of 22 years. These observations can be understood in terms of the amplification of magnetic field by inductive motion of a conducting fluid in the framework of magnetohydrodynamics (MHD) (e.g., Krause & Rädler 1980) by using a nonlinear dynamo theory. Specifically, the coexistence of regular and complex behaviour of solar magnetic field can be due to the dynamic balance among various nonlinear interactions. It is thus important to understand the role of nonlinear interaction in the regulation of dynamo.
To understand the nonlinear dynamo process, dynamical systems are the simplest tools because they have the capability of exhibiting complex dynamics as (control) parameters of the system change. A notable study of dynamo was previously done by Weiss et al. (1984) by using dynamical model, who illustrated in detail the transition from regularity to chaos as the control parameter (the so-called dynamo number) varies. In particular, Jones et al. (1985) were able to explain the existence of aperiodic magnetic cycle in a dynamical system given by complex Lorenz system, even without an explicit stochasticity (e.g., in parameters, external forcing, etc.).
Based upon the traditional α Ω dynamo (Parker 1955; Moffat 1978; Parker 1979), the dynamo number in this work, which controls the efficiency of dynamo action, is proportional to the product of α and Ω effects, which generate a toroidal field from a poloidal field by cyclonic convection (α effect) and a poloidal field from a toroidal field by shearing (Ω effect).
There is also a dynamical model (Charbonneau 2005) based on flux transport dynamo (another popular dynamo model), which involves the global transport of the magnetic fields via meridional circulations, as well as buoyant rise in magnetic flux (Dikpati & Charbonneau 1999; Rempel 2006). Weiss et al. (1984) explained the existence of aperiodic magnetic cycles using a simple parameterized model. Since then, various studies have revealed that with a certain set of conditions, low-order models are able to capture the basic behaviour of solar and stellar magnetic fields (Tobias et al. 1995; Weiss et al. 2001; Mininni et al. 2001; Pontieri et al. 2003; Wilmot-Smith et al. 2005; Passos & Lopes 2008; Lopes & Passos 2009, 2011). A continuous effort has been devoted to further developing dynamo models to explain interesting properties of solar magnetic activity, as well as solar differential rotational profile, uncovered by high-resolution observational data (Yoshimura 1975, 1978; Jepps 1975; Ivanova & Ruzimikin 1977).
To understand the effect of various nonlinear interactions that could be important in the evolution of stellar rotation and magnetic fields over the course of spin-down, we revisit a simple parameterized dynamo model that can serve as a full dynamo model. In fact, the observations of the evolution of magnetic fields and rotation of other stars of different ages with different rotation rates have been providing us with valuable information about the relation among rotation, differential rotation, and magnetic activity, which can be utilized to test a dynamo theory against observations for improvement, which can work not only for the Sun but also for other solar-type stars with different rotation rates. The exploration of the relation between magnetic activity and rotation for a broad range of rotation rates is, however, a very challenging problem and cannot be done practically by full MHD simulations owing to the required computational demand (e.g., the resolution of a broad range of length and time scales, etc.). An illustrative theoretical model for a minimal number of key quantities is thus valuable for gaining
Article published by EDP Sciences
A100, page 1 of 12
A&A 563, A100 (2014)
insight into this problem. This is particulary the case in view of the limitations inherent in any model (e.g., in parameterizations of transport coefficients in MHD simulations). We note that a simple parameterized model has attracted a lot of attention for fusion plasmas as a useful model for understanding regulation and bifurcation (L-H transition), which is crucial for improving plasmas (Zhu et al. 2013; Malkov et al. 2009; Kim & Diamond 2003).
The main purpose of this paper is to present detailed analysis of nonlinear dynamo models to elucidate the effect/role of various nonlinear interactions that have been proposed in previous works and thus to identify self-regulatory behaviour in a viable solar/stellar dynamo model that can explain observations. To this end, we first examine the nonlinear effect through nonlinear transport coefficients (α-quenching and flux losses) and feedback of differential rotation on frequency p and magnetic field strength |B|. Our focus would be the feedback mechanism of the Lorentz force on α-effect, differential rotation and the enhanced magnetic dissipation through flux losses. Considering observations, we then demonstrate that regulation by the “near” balance between the (nonlinear) generation and destruction of the magnetic fields is a desirable property of a successful model. In particular, this dynamic balance leads to the almost linear increase in frequency with rotation rate, flattening of magnetic energy for high rotation, and quenching in total shear consistent with observation.
The remainder of this paper is organized as follows. In Sect. 2, we introduce our model. The detailed analysis of this model is provided step by step in Sects. 3 to 5: Sect. 3 discusses nonlinear effects through transport coefficients and Sect. 4 (Sect. 5) focuses on nonlinear effects through mean (fluctuating) differential rotation. We explain the implications of our results, together with key observational data in Sect. 6. Section 7 contains the conclusions.
2. Model equations
The nonlinear dynamo model under investigation is the dynamical system consisting of the seven coupled ordinary differential equations (ODE) (Sood & Kim 2013; Weiss et al. 1984),
(∂t + F2)A = 2DB, where
D=
D0 , F1
(1)
(∂t
+
F3)B
=
i(1
+
w0)A
1 iAw, 2
(2)
(∂t
+ ν0)w0
=
1 i(AB 2
AB),
(3)
(∂t + ν)w = iAB,
(4)
which are given in a dimensionless form. Here, A is the poloidal
magnetic flux, B is the toroidal magnetic field, w0 and w are mean and fluctuating differential rotations with zero and twice
the frequency of A and B, respectively, which are generated by
a nonlinear back reaction of A and B. Poloidal magnetic field A,
toroidal magnetic field B, and fluctuating differential rotation w
are complex, whereas mean differential rotation w0 is real. The complex conjugate of A is represented by A. We note that in
these dimensionless units, the total mean differential rotation is
given
by 1 + w◦
=
ΔΩ Ω
;
thus,
mean
differential
rotation
w0,
due
to the back reaction, appears with a negative sign to reduce the
total shear from 1 to 1 + w0 < 1. This is because the differ-
ential rotation is inhibited by the tension in the magnetic field
lines via Lorentz force (i.e., causing the quenching of Ω-effect.).
Viscosity of mean and fluctuating differential rotations are represented by ν and ν0, respectively, which are considered to be constant.
The parameter D in Eq. (1) involves the dynamo number D0 ∝ αΩ, which is the key (dimensionless) control parameter. And F1, F2, and F3 are “nonlinear” transport coefficients, defined as
F1 = 1 + κ1|B|2, F2 = 1 + λ1|B|2, F3 = 1 + λ2|B|2,
where κ1, λ1, and λ2 are constant parameters; F1 represents the α source term (i.e., helicity by the magnetic field) due to the back
reaction by magnetic field that was studied in previous works
including Pouquet et al. (1976) and Kleeorin et al. (1982). The
enhanced magnetic dissipation through the loss of toroidal and
poloidal magnetic fluxes is represented by F2 and F3, respectively, which removes magnetic flux from the region in which the dynamo operates. We note that this is totally different from the assumption of reduction in magnetic dissipation used in some previous works. In this model, we assume that α is a parameter that increases with rotation as α ∝ Ω based on an αΩ dynamo, but we envision that α captures other physical mechanisms that increase linearly with Ω. Therefore, dynamo number D0 is scaled with rotation rate Ω as D0 ∝ Ω2 (Sood & Kim 2013).The proportionality constant between D0 and Ω2 is taken to be unity in the paper for simplicity. In this paper, our model focuses on the dynamic balance through F1 F3. Other possible feedback, such as the Malkus-Proctor effect (1975) or Λ-quenching (Kitchatinov et al. 1994), will be left for future work. It is impor-
tant to note that according to our non-dimensionlization, physi-
cal poloidal magnetic field A is obtained by dividing our dimensionless poloidal magnetic flux A in Eqs. (1)(4) by rotation Ω.
Expecting the regulation in a nonlinear dynamo model,
which can weaken (suppress) the chaotic solution, we make an ansatz for the finite-amplitude solution to Eqs. (1)(4) in the following system
A = aeipt, B = bei(pt + φ), w = ca2e2ipt,
(5)
where a > 0 and b > 0 are assumed to be positive real; c is a complex constant; p is real angular frequency; φ is the phase dif-
ference between toroidal b and poloidal a magnetic fields. Using finite amplitude solution of these forms in Eqs. (1)(4) gives us the following five relations among a, b, φ, p, and w0
p2
+
F2F3
=
(2p2 + 2(4 p2
F2ν) a2 , + ν2)
(6)
(F2
+
F3)p
=
2D
pa2 ν0
+
(2F2 2(4
p2
ν) +
p a2 ν2)
,
(7)
w0
=
pa2 2ν0 D
,
(8)
a = 2Db ,
(9)
p2 + F22
tan φ = p ,
(10)
F2
where
D
=
D0 F1
,
F1
=
1 + κ1b2,
and
F2,3
=
1 + λ1,2b2.
In the
above
equations, is the parameter tracking the presence of fluctuating
shear w as
=
1, w 0, 0, w = 0.
A100, page 2 of 12
A. Sood and E. Kim: Detailed mathematical and numerical analysis of a dynamo model
Therefore, when there is no fluctuating shear ( = 0), Eqs. (6), (7) are simplified as
p = ± F2F3,
(11)
(F2
+
F3)
+
4D20b2 ν0F12F22(F2 +
F3)
F1
F2F3 = 2D0,
(12)
where Eqs. (11) and (9) were used in obtaining Eq. (12). It is
worth noting that neglecting nonlinear terms in the above equations (i.e., F1 = F2 = F3 = 1, w0 = 0) gives the linear dispersion relation for the onset of bifurcation as p = 1 and φ = π/4.
Interestingly, Eq. (11) shows that the frequency p of the mag-
netic field is determined by the dissipation of both the magnetic
fields, given by the geometric mean of F2 and F3. Thus p can increase with b due to the enhanced magnetic dissipation given by F2 = 1 + λ1b2 or F3 = 1 + λ2b2. In contrast, p is not influenced by α-quenching (F1), demonstrating different effects on the frequency p of α-quenching (F1) and of flux losses (F2,3). The flux√losses F2 and F3 determine the phase φ between b and a as φ = F3/F2; that is, when the toroidal flux loss F3 is stronger
(weaker) than poloidal flux loss F2, it removes b more (less) efficiently than a, increasing (decreasing) the phase φ between b and a. w0 in Eq. (8) clearly shows that the sign of w0 is negative definite, always reducing the total mean differential rotation 1 + w0 < 1. Explicit examples of these behaviours are presented in the following Sects. 4, 5 through the detailed analysis of fi-
nite amplitude solution by taking the different limits of F1, F2, and F3 as well as w0, w → 0. This will elucidate the role of α-quenching, flux losses, mean and fluctuating differential rotation in self-regulatory behaviour of magnetic activity/cycle. Analytical predictions in Sects. 34 are then accompanied by
the confirmation by numerical simulations. Specifically, for the
numerical parts of our paper, we solve Eqs. (1)(4) by timestepping for all complex variable A, B, w, and w0 using ν = 0.5, ν0 = 35.0 for different values of D0 between 1400 (See Sood
& Kim 2013 for more details). We also note that for the numerical simulations, the values of the parameters κ1, λ1, and λ2 are assumed to have the same value, κ1 = λ1 = λ2 ≡ λ = 2.5.
3. Nonlinear effects through transport coefficients
The α-effect and flux losses are the crucial transport coefficients, capturing the overall effects of small (unresolved) turbulence.
The feedback of growing magnetic fields alters the value of these transport coefficients, making them dependent on magnetic fields. These nonlinear transport coefficients provide a way
for a dynamo to self regulate. To understand the self regulation through these transport coefficients, it is imperative to investigate the case in the limit of a very weak mean or fluctuating differential rotation by assuming w0, w → 0. The relevant Eqs. (8)(12) are then
p = ± F2F3,
(13)
(F2 + F3)F1 F2F3 = 2D0,
(14)
a = 2D0b ,
(15)
F1 p2 + F22
tan φ = p ·
(16)
F2
In the above system, we consider different cases of F1, F2, and F3 and provide the scalings of p, b, and a with rotation.
In the remainder of the paper, the scaling of poloidal field with Ω in physical units is obtained by dividing A by Ω because of
our nondimensionlization as noted in Sect. 2. Also note that here a = |A| and b = |B|.
1. F1 = F = 1 + λb2, F2 = F3 = 1. In the presence of α-quenching only with no flux loss, Eqs. (13)(16) are simpli-
fied as
p = 1,
(17)
2(1 + λb2) = 2D0,
(18)
a = 2D0b , (1 + λb2)
(19)
tan φ = 1.
(20)
Equation (17) explicitly shows that while α-quenching (F1) provides nonlinear damping to saturate the growth of mag-
netic field, it does not influence the frequency p = 1, which
is the value of the frequency at the onset of bifurcation to
a finite amplitude solution. Moreover, phase φ is not altered
by
α-quenching,
maintaining
a
linear
value
π 4
.
In
the
limit
of
D0 1, Eqs. (18)(20) enable us to find the scalings of a as
a Ω and and b as b Ω.
We now compare these analytical results by numerical simu-
lation of Eqs. (1)(4). As noted in Sect. 2, we solve these equa-
tions by time stepping and obtain the frequency spectrum by
taking a FFT (fast Fourier transform) of the time series of dy-
namical variable B. Once we have the power spectrum we as-
sign colours according to the colour bar next to the figure. We
find that analytical scalings are in perfect agreement with the re-
sults obtained from numerical simulations shown in Fig. 1 where
κ1 = λ = 2.5 is used. Specifically, Fig. 1a represents the intensity of frequency spectrum for different values of Ω where
the high-to-low intensity is coded in yellow to black colours. A
strip of a bright yellow colour tracks the frequency of maximum
intensity, which hardly changes with Ω with the same scaling
(p = 1) as predicted above. We note that the frequency shown in
Fig. 1a is lower than the angular frequency p by a factor of 2π.
Figures 1b1c show b and a as functions of Ω, where the scal-
ings similar to the analytic values can be obtained. These results
confirm the validity of our finite amplitude solutions. We note
that a Ω implies that the scaling of poloidal magnetic field in the physical unit is Ω0.
2. F1 = 1, F2 = F3 = F = 1 + λb2. For simplicity, when poloidal flux loss and toroidal flux loss are enhanced to the same
degree while there is no α-quenching, Eqs. (13)(16) become
p (1 + λb2), 2D0 = 2(1 + λb2)2, a 2D0/21/2(1 + λb2)3/2,
and tan φ = 1. Therefore, both flux losses lead to the increase in
frequency p (1+λ1,2b2) with b, while their effects are canceled
in
the
phase
shift
φ
=
π 4
.
The
increase
of
p
with
b
is
determined
consistently by the nonlinear dynamics, which sets the values of
b. This dynamical determination of p is reminiscent of the flux
transport dynamo where p depends on meridional flow, etc. In
the limit of D0 1, the scalings of p, b, and a are found to be
p
Ω,
b
Ω
1 2
,
and
a
Ω
3 2
,
which
are
again
confirmed
by
numerical simulations.
3. F1 = F2 = F3 = F = 1 + λb2. In this case α-quenching and flux loss due to poloidal magnetic field and toroidal mag-
netic field are the same, equally contributing to the flatten-
ing of magnetic fields for large rotation, Eqs. (13)(16) give p F 1 + λb2, D0 = (1 + λb2)3, a = 2D0b/21/2(1 + λb2)3, and tan φ = 1. Clearly, poloidal flux loss and toroidal flux loss
both determine the maximum frequency p of the magnetic field;
p increases with Ω, similar to the case where the effect of both
A100, page 3 of 12
POWER
FREQUENCY OF MAGNETIC FIELD
A&A 563, A100 (2014) κ1=2.5,λ1=λ2=0.0
͉A͉
κ1=2.5,λ1=λ2=0.0
͉B͉
ROTATION RATE
(a) p as a function of Ω
Ω (b) |A| as a function of Ω
Ω (c) |B| as a function of Ω
Fig. 1. Frequency of maximum intensity p, poloidal magnetic field |A| and toroidal magnetic field |B| as a function of rotation rate Ω for F1 = F, F2 = F3 = 1.0 for Case 1 in the fourth-order system.
κ1=0.0,λ1=λ2=2.5
κ1=0.0,λ1=λ2=2.5
͉B͉ ͉A͉
POWER
FREQUENCY OF MAGNETIC FIELD
ROTATION RATE
(a) p as a function of Ω
Ω
(b) |A| as a function of Ω
Ω
(c) |B| as a function of Ω
Fig. 2. Frequency of maximum intensity p, poloidal magnetic field |A| and toroidal magnetic field |B| as a function of rotation rate Ω for F1 = 1.0, F2 = F3 = F for Case 2 in the fourth-order system.
κ1=λ1=λ2=2.5
κ1=λ1=λ2=2.5
͉A͉
͉B͉
POWER
FREQUENCY OF MAGNETIC FIELD
ROTATION RATE
(a) p as a function of Ω
Ω
(b) |A| as a function of Ω
Ω
(c) |B| as a function of Ω
Fig. 3. Frequency of maximum intensity p, poloidal magnetic field |A| and toroidal magnetic field |B| as a function of rotation rate Ω for F1 = F2 = F3 = F for Case 3 in the fourth-order system.
flux losses is considered; a and b both increase with rotation rate
(cf. Fig. 3a to 3c). Interestingly, the phase between a and b re-
mains unaltered due to the equal amount of F2 and F3, with its
value φ
=
π 4
.
In
the
limit
of
D0
1,
we
find
that
p
Ω
2 3
,
a
Ω,
and
b
Ω
1 3
.
Numerically
found
scalings
are
almost
similar for p, b, and a (cf. Table 1). Thus, equal amount of
α-quenching, enhanced poloidal flux loss and toroidal flux loss
lead to stronger reduction in magnetic field for a higher rotation
rate, which can provide strong dynamic balance in a nonlinear
dynamo.
4. F1 = F2 = F = 1 + λb2, F3 = 1. In the presence of only α-
quenching and enhanced poloidal magnetic flux loss, the various scalings are simplified as p (1 + λb2)1/2, 2D0 = (2 + λb2)2
(1 + λb2)1/2, a = 2D0b/(2 + λb2)1/2(1 + λb2)2, tan φ 1/(1 + λb2)1/2. Thus, φ decreases for large b (or large D0), reducing
phase shift between b and a to zero. Furthermore, in the limit of
D0
1,
these
give
us
p
Ω2 5
,
b
Ω2 5
,
and
a
Ω4 5
.
5. F1 = F3 = F = 1 + λb2, F2 = 1. This is the case where α-quenching and flux loss due to toroidal magnetic field are in action; Eqs. (13) to (16) give p (1 + λb2)1/2, 2D0 = (1 + λb2)5/2, a = 2D0b/(2 + λb2)1/2(1 + λb2)2, and tan φ = 1. Clearly,
frequency p of magnetic field is influenced by toroidal magnetic
field b. For D0 1, the scalings of p, b, and a are found to be
p
Ω
2 5
,
b
Ω
2 5
,
and
a
Ω
6 5
.
Compared
to
the
Case
4
above,
we see that change from toroidal to poloidal flux loss only affects
the scaling of a with Ω.
A100, page 4 of 12
A. Sood and E. Kim: Detailed mathematical and numerical analysis of a dynamo model
Table 1. Scaling exponents for p, |B|, and |A| for Ω ≥ 5 in the cases of the fourth-order system where p = Ωξ, |B| = Ωβ, and |A| = Ωγ.
Transport coefficients ξ
β
γ
F1 = F, F2 = F3 = 1 F1 = 1, F2 = F3 = F F1 = F2 = F3 = F F1 = F2 = F, F3 = 1 F1 = F3 = F, F2 = 1 F1 = F2 = 1, F3 = F F1 = F3 = 1, F2 = F
0 1.0 1.0 1.0 0.50 1.55 0.66 0.41 1.08 0.41 0.47 0.84 0.41 0.47 1.55 0.67 0.69 2.03 0.67 0.69 1.35
6. F3 = F = 1 + λb2, F1 = F2 = 1. Here flux loss due to toroidal magnetic field tames the amplitude of b for large Ω, turning Eqs. (13)(16) into the form p = (1 + λb2)1/2, 2D0 = (2 + λb2)(1 + λb2)1/2, a = 2D0b/(1 + λb2)1/2, and tan φ (1 + λb2)1/2. Therefore, toroidal flux loss increases the
frequency according to the strength of b, which is determined
dynamically. Also, the phase φ between a and b increases, ap-
proaching
π 2
as
D0
1, confirming that the preferential removal
of toroidal flux over poloidal flux increases the phase. In the limit
of D0
1,
we
find
power-law
scalings
p
Ω
2 3
,
b
Ω
2 3
,
and
a Ω2.
7. F2 = F = 1 + λb2, F1 = F3 = 1. Flux loss due to poloidal field determines the frequency, simplifying Eqs. (13)(16) as p = (1 + λb2)1/2, 2D0 = (2 + λb2)(1 + λb2)1/2, a = 2D0b/(1 + λb2)(2 + λb2)1/2, tan φ = (1 + λb2)1/2. In the limit of D0 1, the scalings are found as p Ω2/3, b Ω2/3 and a Ω4/3, tan φ Ω2/3. Therefore, compared to Case 6 above, the differ-
ence is seen in the scalings of a and φ; that is, reduction in the
scaling of a and φ with Ω is observed, contrary to the case where
only saturation mechanism is flux loss due to toroidal magnetic
field.
To summarize, the effects of α-quenching F1 and flux losses F2 and F3 are shown to be different; p is dynamically deter-
mined by b through flux loss F2 and F3, but with no influence of α-quenching F1; that is, p = 1 with α-quenching, while p increases with Ω due to flux loss. The effects of F2 and F3 are almost similar, leading to the same scalings of p and b with Ω.
The phase φ is determined by the ratio of F2 and F3. In all cases, b is always found to increase with Ω as b ∝ Ωβ where β takes
the value between 1/3 and 1. The largest β = 1 is found in the
case of α-quenching only, while smallest β = 0.4 in the pres-
ence of nonlinear terms of same magnitude. Thus, in this fourth-
order system, b keeps growing with Ω, without flattening for
large Ω. Numerical values of scaling exponents are summarized
in Table 1.
4. Nonlinear effect through mean differential
rotation
We now incorporate the nonlinear effect due to the modification of differential rotation by magnetic fields and examine the role of mean differential rotation in self-regulatory behaviour. Here, we exclude the fluctuating differential rotation in order to identify the effect of mean differential rotation. The effect of fluctuating differential rotation is presented in Sect. 5. The main equations are Eqs. (6)(10) for w = 0, and ν0 = 35 is chosen for numerical simulations.
1. F1 = F2 = F3 = 1. Even in the absence of α-quenching or any flux loss, the back reaction of mean differential rotation w0
provides the saturation mechanism to ensure a finite-amplitude solution, reducing Eqs. (6)(10) to
p = ±1,
(21)
b = D0 1/2ν10/2(1 D0 1)1/2,
(22)
a = D10/2ν10/2 (2(1 D0 1)),
(23)
w0
=
1
+
1 D0
,
(24)
tan φ = 1.
(25)
Equation (21) immediately shows that the frequency of magnetic
field is independent of rotation rate, with no influence of w0. In
the limit of a high rotation rate, i.e. D0 1, Eqs. (22)(25)
give us analytical scalings b Ω1, a Ω and total shear
1 + w0 Ω2 1 for Ω 1. The phase angle between
poloidal magnetic
field a and b keeps
its
linear
value
of φ
=
π 4
(cf. Eq. (25)). We note that the dependence of the total shear on
rotation rate Ω2 shows significant shear quenching. These re-
sults are confirmed by numerical simulations. Figure 4a shows
one single dominant frequency, p 1, that hardly changes with
rotation. A red broad band of weak intensity around the local-
ized frequency of maximum intensity increases its width initially
and then decreases for higher rotation. This behaviour arises be
cause shear quenching due to Lorentz force is too strong, leading
to significant quenching of magnetic field strength b for Ω 1.
This severe shear quenching is shown in Fig. 4d, where total
shear decreases rapidly and approaches zero for a higher rotation
rate (Ω ≥ 12). Numerically, scalings of |B|, |A| and total shear 1 + w0 for high rotation are found to be a Ω1.02, b Ω0.98, 1 + w0 Ω2.0 D0 1, which are similar to analytically predicted values, noted above.
2. F1 = F = 1 + λb2, F2 = F3 = 1. In the presence of α-quenching alone with no flux loss, Eqs. (6) to (10) become
p = ±1,
(26)
F2 +√Dν00b2 = D0F,
(27)
a = 2D0b ,
(28)
F
w0
=
D0b2 F ν0
,
(29)
tan φ = 1.
(30)
Again, the frequency p is independent of rotation rate.
Analytical scalings are obtained from Eqs. (26)(30) for the
limit of the high rotation rate. In the limit of the high rotation rate, D0 1, we obtain b Ω1, a Ω, and (1 + w0) Ω2. The total shear 1+w0 Ω2 1 for large Ω implies that Lorentz force generates strong mean differential rotation w0 < 0, causing
the significant reduction in the magnetic field. 3. F2 = F3 = F = 1 + λb2, F1 = 1. Equations (6) to (10)
give us
p = ±F,
(31)
F4 +√Dν00b2 = D0F2,
(32)
a=
2D0b F 3/2
,
(33)
w0
=
D0b2 F 2 ν0
,
(34)
tan φ = 1.
(35)
A100, page 5 of 12
POWER
FREQUENCY OF MAGNETIC FIELD
A&A 563, A100 (2014)
0
κ1=λ1=λ2=0.0
͉A͉
ROTATION RATE
(a) p as a function of rotation rate. κ1=λ1=λ2=0.0
͉B͉
Ω
(b) |A as a function of Ω
κ1=λ1=λ2=0.0
1+ω0
Ω
(c) |B| a function of Ω
Ω
(d) Total shear as a function of rotation rate.
Fig. 4. Frequency of maximum intensity p, poloidal magnetic field |A|, toroidal magnetic field |B| and total shear as a function of rotation rate Ω for F1 = F2 = F3 = 1 for Case 1 in the fifth-order system.
Thus, p changes as b changes with Ω (cf. Eq. (31)) due to non-
linear flux losses F2 and F3. In the limit of the high rotation rate, D0 1, we find b Ω1 1, 1 + λb2 1, a Ω, and 1 + w0 Ω2. The decline in toroidal magnetic field with Ω is
again due to the severe shear quenching present in the system.
On the other hand, the phase shift between a and b remains as
π 4
owing
to
equal
amount
of
the
toroidal
and
poloidal
magnetic
fluxes.
4. F1 = F2 = F3 = F = 1 + λb2. Equations (6)(10) are
simplified as
p = ±F,
(36)
F6 +√Dν00b2 = D0F3,
(37)
a=
2D0b F 3/2
,
(38)
w0
=
D0b2 F 2 ν0
,
(39)
tan φ = 1.
(40)
In this case we numerically find that the presence of F1, F2, and F3 leads to interesting dynamics for large Ω. For instance, the system bifurcates at Ω = 19.7 with a sudden change in p, |B|, |A|, and total shear (cf. Figs. 5a5d). This result suggests a
possibly dramatic change in the dynamo owing to a strong mean
shear. Its physical relevance in the evolution of solar spin-down
will be addressed in future work.
5. F1 = F2 = F = 1 + λb2, F3 = 1. The presence of α-quenching and nonlinear poloidal flux loss reduces
Eqs. (6)(10) to
p = ± F,
(41)
b2 = 21D0 1F6(1 + F1)(F1/2 1 F1),
(42)
a = 2√D0b ,
(43)
F2 F + 1
w0
=
pa2 F 2ν0 D0
,
(44)
tan φ = F1/2.
(45)
We note that p is influenced by b as p b (cf. Eq. (41)). Again,
analytical scalings are obtained within the limit of a very high rotation rate, i.e., D0 1 as p Ω2/5, b Ω2/5, a Ω4/5, and (1 + w0) Ω2, whereas the phase shift between a and b decreases as rotation rate increases. The analytical scalings for p, |B|, and |A| are the same as for those obtained in the fourth-order system in the case of α-quenching and flux loss. Numerically
found scalings are very similar to these analytical results. Somewhat similar results are found for different cases, as
briefly summarized as follows. For F1 = F3 = F, F2 = 1, and F3 = F, F1 = F2 = 1, we find that frequency p and phase shift are influenced by b. For F2 = F, F1 = F3 = 1, p and phase shift are the same as in Case 5. All the numerical results for high rotation, Ω ≥ 5 are listed in Table 2.
A100, page 6 of 12
POWER
FREQUENCY OF MAGNETIC FIELD
A. Sood and E. Kim: Detailed mathematical and numerical analysis of a dynamo model
κ1=λ1=λ2=2.5
͉A͉
ROTATION RATE
(a) p as a function of rotation rate. κ1=λ1=λ2=2.5
͉B͉
Ω
(b) |A| as a function of Ω
κ1=λ1=λ2=2.5
1+ω0
Ω
(c) |B| a function of Ω
Ω
(d) Total shear as a function of rotation rate.
Fig. 5. Frequency of maximum intensity p, poloidal magnetic field |A|, toroidal magnetic field |B| and total shear as a function of rotation rate Ω for F1 = F2 = F3 = F for Case 4 in the fifth-order system.
Table 2. Scaling exponents for p, |B|, |A|, and 1 + w0 for Ω ≥ 5 in the cases of the fifth-order system where p = Ωξ, |B| = Ωβ, |A| = Ωγ, and 1 + w0 = Ωδ.
Transport coefficients
F1 = F2 = F3 = 1 F1 = F, F2 = F3 = 1 F1 = 1, F2 = F3 = F F1 = F2 = F3 = F F1 = F2 = F, F3 = 1 F1 = F3 = F, F2 = 1 F1 = F2 = 1, F3 = F F1 = F3 = 1, F2 = F
ξ
0 0 0.99 varies 0.39 0.43 0.30 0.57
β
0.98 1.39 1.56 varies 0.45 1.45 1.02 1.62
γ
1.02 1.42 1.30 varies 0.93 1.66 1.20 1.30
δ
2.0 3.46 4.30 varies 0.16 4.40 2.76 3.21
found to be decreased with Ω after an initial increase in all cases except F1 = F2 = F, F3 = 1, which is very similar to the numerical results found for F1 = F2 = F, F3 = 1 in Sect. (3). But in certain cases where the combined action of F1 = F2 = F3 = F is considered, A/Ω grows faster than |B| for higher Ω.
In summary, the mean differential rotation generated by
the Lorentz force severely inhibits the dynamo with significant quenching of magnetic fields for large Ω. That is, without fluctuating differential rotation, quenching in mean differential rota-
tion tends to become severe, possibly shutting down the dynamo for large Ω. This thus suggests that self regulation of differential rotation through fluctuating differential rotation is needed to
prevent it. This will be shown in the next section.
We now compare these results with those obtained in the
fourth-order system. The similarity is found in the frequency
behaviour of p that is controlled by the flux loss through F2 and F3, without being influenced by α-quenching and also in phase shift, which is determined by ratio of F2 and F3. Also, it is noticed that p does not change its value with rotation rate for F1 = F2 = F3 = 1 and F1 = F, F2 = F3 = 1, bearing a resemblance to Case 1 in Sect. 3. The similar role of F2 and F3 in the fourth-order system is, however, broken owing to mean differential rotation. The agreement between analytical
scalings and numerical scalings becomes less accurate than the
fourth-order system, with only two cases of a close match (e.g., F1 = F2 = F3 = 1 and F1 = F2 = F, F1 = 1). Both b and a are
5. Nonlinear effect through fluctuating differential
rotation
The goal of this section is to understand the effect of fluctuating differential rotation by assuming w0 = 0 in Eqs. (6)(10). Since, analytical solutions are not particularly illuminating, Eqs. (6)(10) are solved numerically to examine how the scalings of a, b, and p change with Ω in different cases. We choose ν = 0.5 for these simulations to highlight the effect of nonlinear terms in taming the chaotic property of the system.
I. F1 = F2 = F3 = 1: this is the case where dynamo saturates solely due to the back reaction of fluctuating differential rotation with no nonlinear feedback through transport coefficients.
A100, page 7 of 12
POWER
FREQUENCY OF MAGNETIC FIELD
A&A 563, A100 (2014)
κ1=λ1=2.5
͉A͉
ROTATION RATE
(a) p as a function of rotation rate. κ1=λ1=2.5
͉B͉
Ω
(b) |A| as a function of Ω
κ1=λ1=2.5
1+ω0
Ω
(c) |B| a function of Ω
Ω
(d) Total shear as a function of rotation rate.
Fig. 6. Frequency of maximum intensity p, poloidal magnetic field |A|, toroidal magnetic field |B| and total shear as a function of rotation rate Ω for F1 = F2 = F, F3 = 1 for Case 5 in the fifth-order system.
Figure 7a shows the frequency spectra for different values of Ω. We can see a broad band of frequency p of a magnetic field of high intensity, which increases very rapidly with Ω. This broad band is a manifestation of the presence of many different frequencies in the system as a result of chaotic dynamics. A lo-
calized band of lower frequencies is also noticeable, which increases with Ω. The b and a plotted in Figs. 7b and 7c both show their rapid increase with Ω with small fluctuations appearing for large Ω. Strong chaos in the system is caused by fluctuating differential rotation (cf. Figs. 7a to 7c).
II. The presence of α-quenching or either flux loss tames the chaos, leading to a finite amplitude solution with a localized frequency. For different values of F1, F2, and F3, the scaling results of dynamical variables for large Ω are summarized in Table 3. The scalings p, |B|, and |A| are highly variable with Ω, especially for small Ω. We thus study these as a function of Ω by computing local scalings and plot them in Figs. 8a8c. For different combinations of F1, F2, and F3, we plot results using different colours/linestyles in Figs. 8a8c. We denote the local scaling exponents of p, |B|, and |A| as ξ1, β1, and γ1, respectively. Clearly, the change in local scalings of p, |B|, and |A| become less variable for high-rotation Ω ≥ 5 (cf. Figs. 8a8c). It is also interesting to see that the scalings of p are more robust because they vary less than those in |B| and |A|.
We first examine the effect of the inclusion of flux losses in the presence of nonlinear α-effect. In the case of α-quenching only (i.e., for F1 = F, F2 = F3 = 1), |B| grows rapidly with Ω,
Table 3. Scaling exponents for p, |B|, and |A| for Ω ≥ 5 in the cases of the sixth-order system where p = Ωξ, |B| = Ωβ, and |A| = Ωγ.
Transport coefficients ξ
β
γ
F1 = F, F2 = F3 = 1 F1 = F2 = F, F3 = 1 F1 = F2 = F3 = F F1 = F3 = F, F2 = 1 F1 = 1, F2 = F3 = F F1 = F2 = 1, F3 = F F1 = F3 = 1, F2 = F
0.63 0.73 0.71 0.57 0.50 0.78 0.78 0.40 1.01 0.81 0.36 0.95 1.20 0.52 1.39 1.20 0.44 1.24
whereas p and |A| increase very slowly with Ω (see Figs. 8a8c).
When nonlinear toroidal flux loss is added to this case (i.e., for F1 = F3 = F, F2 = 1), β1 (local scaling of magnetic field strength |B|) is decreased by approximately half, while ξ1 (local scaling of frequency p of magnetic field) and γ1 (local scaling of poloidal magnetic field strength |A|) become larger. The
inclusion of nonlinear poloidal flux loss to this case (i.e., for F1 = F2 = F3 = F) increases the β1 β by 10% with a powerlaw scaling of β = 0.40 (cf. Table 3) in comparison with the value of β1 β = 0.36 in the case F1 = F3 = F, F2 = 1. We note that the reduction in the value of ξ1 ξ is 4% and γ1 γ is 6%. Thus, results suggest that including nonlinear poloidal flux
loss in the presence of nonlinear α and toroidal flux loss reduces the scaling of p with Ω, while increases the scaling of |B|. This
demonstrates that poloidal flux loss does not contribute much to
A100, page 8 of 12
FREQUENCY OF MAGNETIC FIELD POWER
A. Sood and E. Kim: Detailed mathematical and numerical analysis of a dynamo model
κ1=λ1=λ2=0.0
κ1=λ1=λ2=0.0
͉A͉
͉B͉
ROTATION RATE
(a) p as a function of Ω
Ω
(b) |A| as a function of Ω
Ω
(c) |B| as a function of Ω
Fig. 7. Frequency of maximum intensity p, poloidal magnetic field |A| and toroidal magnetic field |B| as a function of rotation rate Ω for F1 = F2 = F3 = 1 for Case 1 in the sixth-order system.
the regulation of the growth of toroidal magnetic field strength with Ω.
Second, we focus on the effect of flux losses when F1 = 1. The equal amount of F2 and F3 increases the scaling of p, |B|, and |A| to a value ξ1 ξ = 1.20, β1 β = 0.52, and γ1 γ = 1.39, respectively. In comparison, toroidal flux loss (i.e., for F3 = F, F2 = F1 = 1) does not change the scaling exponent of p, but it is noticed to reduce the scaling of |B| and |A| with scaling exponents β1 β = 0.44 and γ1 γ = 1.24 in comparison with both flux losses case. Figure 8a shows local scaling of p as a function of Ω for F2 = F3 = F and F3 = F. For F1 = F3 = 1, F2 = F, p, |b| and |a| show fluctuation for a higher rotation rate, as can be seen from Figs. 8a8c, where local scalings of p, |B|, and |A| are highly variable as Ω changes, indicating that poloidal flux loss is not efficient in reducing the effect of fluctuating differential rotation. Therefore, these results suggest that nonlinear toroidal magnetic flux loss is more important than poloidal flux loss in taming the dynamo.
In summary, the study of all cases of the sixth-order system demonstrates that the presence of fluctuating differential rotation leads to magnetic field |B|, which keeps increasing with Ω for high rotation with the scaling in the range [0.36, 0.73] (cf. Table 3). However, this increase in magnetic field is less rapid compared to the case of the fourth-order system with no fluctuating and no mean differential rotation. For instance, in the fourth-order system, the scaling of magnetic field |B| with Ω are [0.41, 1.0] (cf. Table 1). Toroidal flux loss is more important in reducing β1 as a nonlinear term than poloidal flux loss. These results show that in the sixth-order system various saturation mechanisms, especially, α-quenching and toroidal flux loss, are able to slow down the growth of magnetic field with Ω to some degree, but not strongly enough to flatten the magnetic field for large Ω. Compared to the results in the fourth-order system, the opposite effects of mean differential rotation and fluctuating differential rotation shown in Sects. 4 and 5, respectively, suggest that the combined effect of both mean and fluctuating differential rotation is beneficial for the self-regulatory behaviour of dynamo. These opposite effects of mean and fluctuating differential rotation also make the effects of toroidal and poloidal flux loss equally important in the seventh-order system, as discussed in Sect. 6.
6. Implications and key observations
Ever more improved observational data of the evolution of magnetic fields and rotations of various stars of different age and
spectral types with different rotation rates have been revealing valuable information about the relation among rotation, differential rotation, and magnetic activity. First, the cycle period Pcyc of magnetic fields of the solar type stars is shown to depend upon the stellar rotation period Prot as Pcyc ∝ Pβrot, with scaling exponent β = 1.25 ± 0.5 (Noyes et al. 1984); e.g., β = 0.8 for the active branch and β = 1.15 for the inactive branch (Saar & Brandenburg 1999; Charbonneau & Saar 2001; Saar 2002). Second, the magnetic activity (a measure of the strength of magnetic fields) has been observed to increase with stellar rotation but tends to saturate for high rotation (with Prot < 3 day). Third, the differential rotation ΔΩ is observed to increase with the stellar rotation rate Ω, while the relative difference ΔΩ/Ω decreases with Ω. The precise dependence of differential rotation on rotation is quite uncertain since ΔΩ ∝ Ωn where 0 < n < 1 (Fröhlich et al. 2009; Hotta & Yokoyama 2011; Donahue et al. 1996; Reiners & Schmitt 2003; Barnes et al. 2005). Furthermore, the time variation of differential rotation has been reported in recent work (e.g., Fröhlich et al. 2012; Hotta & Yokoyama 2011).
Therefore, a main challenge in dynamo theory is to explain these observations. For instance, the almost linear relation between the frequency of magnetic fields and stellar rotation could be explained within the framework of linear dynamo theory, for instance, by the linear dispersion relation in α Ω dynamo. However, observed magnetic fields are manifestations of nonlinear saturation, making the understanding of how stellar magnetic fields apparently manage to almost maintain a linear dependence of their frequency on rotation rate as one of the fundamental questions in any dynamo theory.
Our results from Sects. 35 above show that none of the cases considered are consistent with all these observations. Towards understanding these observations, Sood & Kim (2013) have numerically studied the seventh-order system, given by Eqs. (1)(4), and performed a thorough parameter study on the choice of nonlinear quenching effects of F1, F2, and F3 by using ν = 1 and ν0 = 35. From their investigation, they proposed a minimal model that can reproduce the observed relation between magnetic frequency and rotation rate. In particular, they highlight the importance of the regulatory behaviour of dynamo through a nonlinear balance between the generation and destruction of the magnetic fields. They also demonstrate the importance of both mean and fluctuating differential rotations in achieving dynamical balance among magnetic fields. We now show how, through the balance among different nonlinear effects of transport coefficients and mean and fluctuating differential rotations, this regulatory behaviour arises in the seventh-order
A100, page 9 of 12
A&A 563, A100 (2014)
5
F1 = F2 = F3 = F
F1 = F, F2 = F3 = 1
4
F1 = F2 = F, F3 = 1
F3 = F, F1 = F2 = 1
F1 = F3 = F, F2 = 1
F2 = F, F1 = F3 = 1
3
F2 = F3 = F, F1 = 1
3.0
F2 = F, F1 = F3 = 1
F1 = F, F2 = F3 = 1
2.5
F1 = F2 = F, F3 = 1 F1 = F3 = F, F2 = 1
F3 = F, F1 = F2 = 1 F2 = F, F1 = F3 = 1
F2 = F3 = F, F1 = 1
2.0
ξ1 β1
γ1
2
1.5
1
1.0
0
0.5
1
0
5
10
15
20
Ω
(a) ξ1 as a function of Ω
0.0
0
5
10
15
20
Ω
(b) γ1 as a function of Ω
3.0
F2 = F, F1 = F3 = 1
F1 = F, F2 = F3 = 1
2.5
F1 = F2 = F, F3 = 1 F1 = F3 = F, F2 = 1
F3 = F, F1 = F2 = 1 F2 = F, F1 = F3 = 1
F2 = F3 = F, F1 = 1
2.0
1.5
1.0
0.5
0.0
0
5
10
15
20
Ω
(c) β1 as a function of Ω
Fig. 8. Local scalings ξ1 for p, γ1 for |A|, and β1 for |B| are plotted as functions of rotation rate for different combinations of F1, F2, and F3, where for different combinations, different colours/linestyles are assigned as: for F1 = F2 = F3 = F black/solid line, F1 = F2 = F, F3 = 1 green/dot, F1 = F3 = F, F2 = 1 gold/dash, F1 = 1, F2 = F, F3 = F pink/dash dot, F1 = F, F2 = F3 = 1 turquoise/dash dot dot, F1 = F2 = 1, F3 = F red/long dash, F1 = F3 = 1, F2 = F turquoise/“+”.
system when F1 F2 F3. To demonstrate how the results in Sects. 46 are altered in this seventh-order system, we use the same parameter values ν = 0.5 and ν0 = 35 used in Sects. 46.
The behaviour of frequency of magnetic field and magnetic
field strength with rotation rate in this seventh-order system is shown in Figs. 9a9b. Figure 9a shows an almost linear increase
in the frequency p of maximum intensity (depicted in yellow)
with rotation rate. A red band of the localized frequency of max-
imum intensity around p is found to gradually increase its width with rotation rate. The power-law dependence of p on Ω is found to be p Ω0.82 for a higher rotation rate and agrees with observations. The flattening of magnetic field strength |B| for a higher
rotation rate can be seen in Fig. 9b, which is also consistent with
observations.
To investigate the balance, in Figs. 10a10b, we plot the
magnitude of various nonlinear terms appearing in Eqs. (1), (2)
for D0 = 2, which are |2DB|, |F2A|, |i(1 + w0|)A, |F3B|, and
|
1 2
iAw|.
Figure
10a
shows
that
there
is
a
balance
between
the
A100, page 10 of 12
α-quenching term |2DB| and poloidal flux loss term |F2A|, de-
picted in black and red, respectively. This thus indicates that
the dissipation and the generation of magnetic field are al-
most balanced in Eq. (1). Figure 10b shows that the genera-
tion of poloidal field due to shear |w0A| (illustrated in black)
is in balance with toroidal flux loss |F3B| (represented in red).
Fluctuating
differential
rotation
|
1 2
iA
w|
depicted
in
blue
is
less
dominant in this case. Thus, the two main nonlinear terms in
Eq. (2) are of similar magnitude.We compare the nonlinear terms
in Eqs. (1) and (2) for all other cases in seventh-order systems
and confirm that the dynamical balance is best achieved for this
seventh-order system with F1 = F2 = F3.
7. Conclusions
We studied nonlinear dynamical model analytically and numerically to elucidate the effects of nonlinear terms in the regulation of a dynamo. In the fourth-order system, flux losses
A. Sood and E. Kim: Detailed mathematical and numerical analysis of a dynamo model
(a) p as a function of rotation rate Ω.
(b) Magnetic field strength |B| as a function of rotation rate Ω.
Fig. 9. Frequency p of magnetic field and toroidal magnetic field |B| are plotted as a function of rotation rate Ω for F1 = F2 = F3 = F in case of the seventh-order system for ν = 0.5 and ν0 = 35.0.
(a) Dynamical balance between nonlinear terms on R.H.S. of Eq. (1).
(b) Dynamical balance between nonlinear terms on R.H.S. of Eq. (2).
Fig. 10. Time series of different nonlinear terms for F1 = F2 = F3 = F in case of the seventh-order system for ν = 0.5 and ν0 = 35.0.
determine the frequency p of magnetic field, without any influence of α-quenching; that is, α-quenching does not affect the frequency p. The effect of flux losses due to poloidal magnetic field and toroidal magnetic field is the same on p and |B| irrespective of the presence or absence of α-quenching. Phase φ
is determined by the ratio of F2 and F3. We observed the increase in p and |B| with Ω in all cases, with power-law scalings ξ [0, 1.0] and β [0.4, 1.0], respectively. We find good agree-
ment between analytical and numerical results in this system.
The presence of shear due to mean differential rotation, that
is, in the fifth-order system, frequency p keeps a constant value p = 1 for different rotations when the α-effect is quenched or when there are no transport coefficients present in the system.
That is, again the frequency p is determined by both flux losses
and phase is determined by the ratio of F2 and F3, which is similar to the fourth-order system. But the effects of F2 and F3, with or without α-quenching, are no longer the same on p and |B| in contrast to the fourth-order system. We find growth of p and |B| in the presence of an equal combination of α-effect and poloidal flux loss (i.e., F1 = F2 = F, F3 = 1). The quenching of magnetic field |B| and p is more significant when the nonlinear α-effect and toroidal flux loss are taken together (i.e., F1 = F3 = F, F2 = 1). The decreasing behaviour of p and |B| in almost all cases is due
to severe shear quenching, which is responsible for the shutting
down of dynamo action.
In the sixth-order system, we present local scalings with rotation rate to demonstrate the effect of nonlinear terms. Here, unlike the fourth- and the fifth-order systems, α-quenching (i.e., F1) influences p, while p and |B| behave differently when the effect of either flux loss is considered in the presence or absence of α-quenching. Interestingly, in this case, p and |B| always increase with Ω despite the feedback from fluctuating differential rotation. Toroidal flux loss is shown to be more important than
poloidal flux loss. The results observed for the fifth-order and the
sixth-order systems thus identify the pivotal role of the combined effect of both mean and fluctuating differential rotation in the self regulation of a dynamo to work near marginal stability. We also
note that the self regulation between generation and dissipation
of magnetic fields is a prerequisite for working of the dynamo. In all cases, the scaling of p is less sensitive to the change in Ω or to the different combinations of nonlinear transport coefficients.
Finally, we presented how this self-regulatory behaviour
comes about in the seventh-order system in the presence of an equal combination of α-quenching, poloidal flux loss, and toroidal flux loss (Sood & Kim 2013), where α-quenching, toroidal flux loss and poloidal flux loss are equally important. While our work is based on the α Ω dynamo model, similar regulation of the generation and the dissipation of magnetic fields not only between nonlinear transport coefficients but also between mean and fluctuating differential rotation is likely to
A100, page 11 of 12
A&A 563, A100 (2014)
persist in other models. The extension of this work to other models will be addressed in a future paper.
It will also be of great interest to utilize our model to understand the spin down of solar type stars (Leprovost & Kim 2010; Kepens et al. 1995) by using a magnetic field that is consistently obtained from a dynamo model (work in progress).
References
Barnes, J. R., Collier Cameron, A., Donati, J.-F., et al. 2005, MNRAS, 357, L1 Charbonneau, P. 2005, Liv. Rev. Sol. Phys., 2, 2 Charbonneau, P., & Saar, S. H. 2001, in Magnetic Fields across the H-R digram,
eds. G. Mathys, S. K. Solanki, & D. T. Wickamasinghe, ASP Conf. Ser., 248, 189 Dikpati, M., & Charbonneau, P. 1999, ApJ., 518, 508 Donahue, R.A., Saar, S. H., & Baliunas, S. L. 1996, ApJ, 466, 384 Fröhlich, H.-E., & Arlt, R. 2012, A&A, 543, A7 Fröhlich, H.-E., Küker, M., Hatzes, A. P., & Strassmeier, K. G. 2009, A&A, 506, 263 Hotta, H., & Yokoyama, T. 2011, ApJ. 740, 1 Ivanova, T. S., & Ruzmaikin, A. A. 1977, Sov. Astron., 21, 479 Jepps, S. A. 1975, J. Fluid Mech., 67, 625 Jones, C. A., Weiss, N. O., & Cattaneo, F. 1985, Physica D, 14, 161 Kepens, R., MacGregor, K. B., & Charbonneau, P. 1995, A&A, 294, 469 Kim, E., & Diamond, P. H. 2003, Phys. Rev. Lett., 90, 185006 Kitchatinov, L.L., Rüdiger, G., & Kükker, M. 1994, A&A, 292, 125 Kleeorin, N. I., & Ruzmaikin A. A. 1982, Magnetohydrodynamics, 18, 116 Krause, F., & Rädler, G. 1980, Mean-Field Magnetohydrodynamics and Dynamo Theory (Oxford: Pergamon Press) Leprovost, N., & Kim, E. 2010, ApJ., 719, 287
Lopes, I., & Passos, D. 2009, MNRAS, 397, 320 Lopes, I., & Passos, D. 2011, J. Atmos. Sol. Terr. Phys., 73, 191 Malkov, M. A., & Diamond, P. H. 2009, Phys. Plasmas, 16, 012504 Malkus, W. V. R., & Proctor, M. R. E. 1975, J. Fluid Mech., 67, 417 Mininni, P. D., Gomez, D. O., & Mindlin, G. B. 2001, Sol. Phys., 201, 203 Moffatt, H. K. 1978, Magnetic Field Generation in Electrically Conducting
Fluids (Cambridge: Cambridge University Press) Noyes, R.W., Weiss, N. O., & Vaughan, A. H. 1984, ApJ, 287, 769 Parker, E. N. 1955, ApJ, 122, 293 Parker, E. N. 1979, Cosmical Magnetic Fields (Oxford: Clarendon Press) Passos, D., & Lopes, I. 2008, ApJ, 686, 1420 Pontieri, A., Lepreti, F., Sorriso-Valvo, L., Vecchino, A., & Carbone, V. 2003,
Sol. Phys., 213, 195 Pouquet, A., Frisch, U., & Leorat, J. 1976, J. Fluid Mech., 77, 321 Reiners, A., & Schmidt, J. 2003, A&A, 398, 647 Rempel, M. 2006, ApJ, 647, 662 Saar, S. H. 2002, in the 11th Cool Stars: Stellar System and the Sun, eds. R. J.
Garcia Lopez, R. Rebolo, & M. R. Zapatero, ASP Conf. Ser., 223, 292 Saar, S. H., & Brandenburg, A. 1999, ApJ, 524, 295 Sood, A., & Kim, E. 2013, A&A, 555, A22 Tobias, S. M., Weiss, N. O., & Kirk, V. 1995, MNRAS, 273, 1150 Weiss, N. O., Cattaneo, F., & Jones, C. A. 1984, Geophys. Astrophys. Fluid
Dynamics, 30, 305 Weiss, N. O., Knobloch, E., & Tobias, S. M. 2001, Nato Science Series 26
(Springer Verlag), 381 Wilmot-Smith, A. L., Martens, P. C. H., Nandy, D., Presit, E. R., & Tobias, S. M.
2005, MNRAS, 363, 1167 Yoshimura, H. 1975, ApJS, 29, 467 Yoshimura, H. 1978, ApJ, 220, 692 Zhu, H., Chapman, S. C., & Dendy, R. O. 2013, Phys. Plasmas, 20, 042302
A100, page 12 of 12